The van would start with no problems all the time. I drove to get gas and shut the engine off. It would not start again after refueling. I checked the Primary Circuit leading to the coil. No current. I followed all testing procedures that only pointed to the "Logic Module". I replaced the module and coil. Still a 'no start' condition. I found the ignition switch relay at the fuse box to be very hot. I replaced it and still a no start. Current is getting to the Logic Module and to the ASD The Automatic Shut Down Relay. Current is also getting to the Distributor by way of the harness, not from coil. Not getting any codes from the self test .