N
new2thz
Guest
Just fitted a car audio system, everything was perfect (no noise). I decided to replace the fuze box, power, ground, remote wiring to 4 guage as my old 8 guage had is days, Now i have ignition noise, a ringing type noise when the ignition is switched to on position, slight engine whine and delay with front and rear amps turning on (sub amp is fine) and h/lights dimm with bass. what could have gone wrong? its so simple to replace the wiring that i did. i even spent little extra on quality wiring, made better grounds replaced battery terminals, made good crimpt soldered connections, everything you could think of to make sure it was done 100%. I dont understand! please help! could a capacitor help?
First, Thanks for your help!
Secondly i have a question for sick214, is this right, any speaker wire just ground any speaker just one! and connect a ground behind the radio unit then wrap the other end exposed wire around all rca output plugs contacting the outer wiring on the rca lead!
Thirdly i have a question for Daveindeal,
with the capacitor should i connect it to all 3 amp b+ power wires or just to the sub amp?
My system, Pioneer head deck, Pioneer front splits w crossover`s, Kenwood 6 x 9`s, Pioneer rcas, 2
Pioneer amps 1 for front one for rear, 1 Us audio amp for subs, 2 x 12" Kicker subs.
First, Thanks for your help!
Secondly i have a question for sick214, is this right, any speaker wire just ground any speaker just one! and connect a ground behind the radio unit then wrap the other end exposed wire around all rca output plugs contacting the outer wiring on the rca lead!
Thirdly i have a question for Daveindeal,
with the capacitor should i connect it to all 3 amp b+ power wires or just to the sub amp?
My system, Pioneer head deck, Pioneer front splits w crossover`s, Kenwood 6 x 9`s, Pioneer rcas, 2
Pioneer amps 1 for front one for rear, 1 Us audio amp for subs, 2 x 12" Kicker subs.