Step one... take a deep breath...
Step 2. If you don't have an account with cricket yet... call and get one... tell them you want to activate a razr on whichever plan you want.
Step 3. after you hang up with them (btw don't *228 even if they tell you to) hit *228
Step 4. if you get the verizon OTA line (OTA=Over the Air) then you need to manually upload your PRL file. Do a search for 1039.prl and then load it up onto a memory card. dial ##778 and select edit. go to prl from the menu in the upper left hand corner then after the card is in the phone, hit load.
Step 5. reset the phone
Step 6. Dial *228 YOU MAY HAVE TO DO THIS A COUPLE TIMES, but it WILL work! It took me like 3 tries but i have heard of people having to do it 10+ times.
Step 7. enjoy: if you want MMS or WAP, follow these steps. PM me if you have any more questions (the following is taken from other posts.. it is not mine and as such i do not claim it to be mine.)
Hey...here is what you need to do to get it working..
Step 1 dial ##778....and go to edit settings..
step 2 when you get in to the epst go to security.
step 3 Change the HDR AN AUTH USER ID to
[email protected] and change the password to cricket....do the same thing to the ppp user id and password
Step 4 got to M.IP Settings and change the nuraber of profiles to 1...also change MIP_MODE to simple ip only.
Press ok and reset the 6700
Step 5 when phone comes on go to settings> connections>connections...under my work network hit add new modem connection..
Step 6 you can name it whatever you want...make sure the modem says cellular line
Step 7 hit next the phone nuraber is #777 and hit next
Step 8 for user name put
[email protected]word is cricket
Step 9 leave domain blank..and hit finish now go back to your connections and hit edit proxy server.
Step 10 select the box that says this network connects to the internet....and select the box under it too..
step 11 were it says proxy server : put Wap.mycricket.com...then hit advanced..
Sterp 12 there are going to be 4 different proxys here...click on the HTTP one..
Step 13 for the proxy put in Wap.mycricket.com....and where it say port put 8080...hit ok and do the same thing to the other 3..
Step 14 hit ok and got back to your connections...and click on the tabs that says advance...and hit select networks and make sure that My work network is used when programs connect to the internet..
Step 15...close all of that stuff out and go to internet explorer...and type in
http://wap.cricket.motricity.com
...then its going to connect...and it should got to the portal.....
step 16 since you cant do much with the portal....type in this
http://www.google.com/m?output=xhtm...=mobileproducts
and search for the website you want to go to and this will let you do it.....
--First Step: Get mobile WAP to work. *chuckles*
http://www.howardforums.com/showthread.php?t=1041644
--Second Step: Go into MMS Messaging menu and choose MMS Configuration to setup the ArcSoft MMS Composer
--Third Step:Configure a server setting for Cricket MMS. Choose the Servers tab and create/select your Cricket MMS entry. If you don't have one already, follow this link:
http://www.howardforums.com/showpos...36&postcount=17
The settings are as follows:
--Server name: Mine is "Cricket MMS"
--Gateway: LEAVE BLANK!!!
--Port Nuraber: 8080
--Server address:
http://mms.mycricket.com/servlets/mms
--Connect Via: Your Cricket WAP connection
--Sending size limitation: Leave alone (350k)
--WAP: WAP 2.0
Make sure your Cricket WAP connection settings have the username
[email protected] and cricket as the password. Nothing else neeRAB to change about your Cricket WAP/Proxy settings!
Got mine to send to my other Cricket account today (Motorola RAZR v3c).
The Server address should be:
http://mms.mycricket.com/servlets/mms
Hope this helps you
