Z
zeedan
Guest
i have w200 set when i on set is on light blue show it mean software problem i want to flash with setool show this error i have change other battery but same problem solution .....................
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
N
nadim_mobiles
Guest
try to make identify and post here
R
roney_nexus
Guest
post logs then i will try bro thx...
T
trenac
Guest
yes without a log none can't help you
Z
zeedan
Guest
solve my problem thank's all brother for helpping
S
Stress Boyz
Guest
System diagnostics passed.
Version 13.21 ready!
[ --- Attach to Phone --- ]
Connecting via Interceptor USB Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Sony Ericsson phone detected.
Phone CID: 51
Phone color: Brown
Flash certificate: A1_DB2010_51_BROWN
Terminating threads...
All threads terminated.
Version 13.21 ready!
[ --- Attach to Phone --- ]
Connecting via Interceptor USB Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Sony Ericsson phone detected.
Phone CID: 51
Phone color: Brown
Flash certificate: A1_DB2010_51_BROWN
Terminating threads...
All threads terminated.
G
Globalindo.Com
Guest
v0.915051/UNI
CARD SERIAL: 00025326
Loaded 51 flash descriptors
CFG:000000000000
ChipID:8040,EMP protocol:0301
NEW SECURITY (MARITA RESPIN) PHONE
PHONE STATE: "DEVELOPER"
FLASH CID: 0051
Speed:921600
FLASH ID:897E
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35575902903005 CERT:BROWN
FLASH CID:51 COLOR:BROWN
can't get packet start.
packet not acknowledged (17)
setGDFS_params failed
failed to setup GDFS
Elapsed: 62 secs.
CARD SERIAL: 00025326
Loaded 51 flash descriptors
CFG:000000000000
ChipID:8040,EMP protocol:0301
NEW SECURITY (MARITA RESPIN) PHONE
PHONE STATE: "DEVELOPER"
FLASH CID: 0051
Speed:921600
FLASH ID:897E
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35575902903005 CERT:BROWN
FLASH CID:51 COLOR:BROWN
can't get packet start.
packet not acknowledged (17)
setGDFS_params failed
failed to setup GDFS
Elapsed: 62 secs.
R
roney_nexus
Guest
CID 50,51,52,53
that is so-called reset procedure.
1. go to emptyboard tab
2. select proper model
3. on settings, check "signed mode"
4. press recovery
5. after succeful recovery
6. on settings uncheck all
7. if gdfs totally damaged, add to firmware area proper gdfs in ssw format,otherwise skip that step
8. add to firmware area proper EROM (EROM CID >= OTP CID)
9. press flash
10. if needed,reflash phone on usual semc tab with needed settings.
that is so-called reset procedure.
1. go to emptyboard tab
2. select proper model
3. on settings, check "signed mode"
4. press recovery
5. after succeful recovery
6. on settings uncheck all
7. if gdfs totally damaged, add to firmware area proper gdfs in ssw format,otherwise skip that step
8. add to firmware area proper EROM (EROM CID >= OTP CID)
9. press flash
10. if needed,reflash phone on usual semc tab with needed settings.