unlocking a65 whit sst 6.50 question?

  • Thread starter Thread starter zoro888
  • Start date Start date
Z

zoro888

Guest
Hello
Ive did a search for threads of this nature and have found none,only for older versions of sst,my question is using sst 6.50 cracked,has anybody used this versions and successfuly unlocked their a65 and for people that have used this versions
can you post the procedure and right configurations to unlock by USB the siemens a65

thank you for your time and reading

zoro888
 
I have not found a thread that talked about unlocking siemens a65 intel chip
or maybe I came across threads whit the person not specifying if it was a amd or intel that he was unlocking(does it matter?)
these are the caracteristrique of my phone:

product:A65
P-DATE:2005-0503
SW VERSIONS: 62.
SW DATE: 22004-12-01
VARIANT:A951
STD_MAP/sw 1/62
D-MAP/PROV 6/145
lang/T9 lg 95/255
CODECS:FR/EFR/HR
audio-PAR:nfv4
ACC:none
DSP P: 0025/0012 rom

first thing I want to do his a backup.(in case some things go wrong)What needs to be backup?there are a lot of programs freia sst joker I am confused which is best to backup the siemens a65 intel chip? I have all three programs
sst 6.50 ufx hacker freia 15 and 18 and JokerV0343 are there good tutorials
out there on how these programs work

can someone direct me to a tutoriol link for one of these programs on how to backup and unlock siemens a65 intel chip

I am not lazy for searching I will keep on searching until I get some light,just trying to get the best from people that have doubt the subject before me!

thank you for helping and reading!
 
must cut the track on the circuit board.

follow instructions in SST help files!!!
 
when u going for unlocking dosnt matter its intel or amd chip inside its need for flashing to write same chip flash file better use sst 5.32 its 100% working
in 6.50 lot off bugs may be during unlocking ur phon gose dead or blinking but first step is cutting right track select correct com port first read info if info done then going for unlocking
 
Thank you very much yousaj22us

I was asking and wondering if the unlocking touches the ic flash chip...only important when flashing a firmware
I have made the cut just like mc60 all that needs to be done is the unlocking
I will try to find a second hand DCA-510 for a65 and unlock has soon has possible also thank you for the tip on using inf versions of sst and telling me that the 6.50 has bugs when unlocking
A little question while at it
the bootmode has to be set to?

thank again
 
will downgrading my phone help me to have a safer unlocking(less problems),like motorola phones you need to downgrade the bootloader to 7.d0 before unlocking via usb,is that the case for siemens phone?certain unlocking program depend on the version of the phone,and when not suported the program hangs,is that the case for sst?,is sst dependent off the version of the phone when unlocking?

PS:ive used a microscope lens to help me cut the track on the phone,one thing weird is some people state that there are two layers on a65 cut test point(mc60),in my case there was just one layer,after the cut I held the board in the light and used my increlite bell & howell lens and could see through the board whit no other layer,I guest they where wrong or...?maybe on certain models?my a65 was made in germany maybe the one made in china have different circuits layout on the board?
l?
 
Back
Top