this error with SL75 what is the solution????? please!!

  • Thread starter Thread starter dvdaio
  • Start date Start date
D

dvdaio

Guest
this error with SL75 what is the solution????? please!!TP ON
New sgold detected...
JBOOT: preloader...
20015C1
JBOOT: Failed to execute.
this when i try to full flash
 
...hmmm,
seems to the bootcore not runing....
Your phone start normal or not?
Try to connect using serial cable and papuautils software in Service Mode and post log file to see what is wrong.
dagos
 
yes my phone is start in normal
Boot in "Service mode"...
Press RED key (Power ON)!
Auto Ignition...
Boot Not loaded!
Phone already in "Service Mode".
Getting Information:
Model: SIEMENS SL75 39 lg6
Phone is in "Service Mode". SecurityStatus: "CustomerMode"
IMEI: 357017001680696
HWID: 411
Attention: Charge Accumulator!
Accumulator Voltage: 3591 mV.
 
i have a veru big probem the my pc restart suddenly and now this is the log when i try to boot
Boot in "Service mode"...
Press RED key (Power ON)!
Auto Ignition...
Transfer boot...
Boot Not loaded!
Boot in "Service mode"...
Press RED key (Power ON)!
Auto Ignition...
Transfer boot...
Boot Not loaded!
No answer from the phone
Check port number, cable, phone, mode!
No answer from the phone
Check port number, cable, phone, mode!
No answer from the phone
Check port number, cable, phone, mode!
Save BCORE in a file...
No answer from the phone
Check port number, cable, phone, mode!
Save BCORE in a file...
No answer from the phone
Check port number, cable, phone, mode!
Boot in "BurnIn mode"...
Press RED key (Power ON)!
Auto Ignition...
Transfer boot...
Boot Not loaded!
Keys on page Code calculated it is not true!
Updating is stopped!
Keys on page Code calculated it is not true!
Updating is stopped!
Keys on page Code calculated it is not true!
Updating is stopped!
Input file: E:\John Work\MT-BOX SIEMENS\x65PapuaUtilsV111b\x65PapuaUtilsV111b\BCORE.bin...
حه
 
...confused
In your first log, everityng is OK (of course, your phone is locked to the operator). Your PC crashed, restarted and after impossible to connect, right?
Ok, verify com port settings, set com to 115200 bauds, CHARGE battery ( try to if working ). Post your response in the next 30 minutes, because I'm going to the one birthday celebration (my)
dagos
 
...you need to make the following steps:
1. Download fullflash file from http://rapidshare.com/files/117848701/SL75_470400_160208.rar
2. You need to make testpoint. See on attachement ( pictures 1,2,3 and SL75.jpeg).
3. Use x65Flasher for fullflash your phone (included bootcore area). Open MS-DOS window and go to the folder with x65Flasher executable. Run command " x65flasher /b " and the x65flasher window will appair. Connect your phone to X65Flasher using TESTPOINT (you need to make it! Solder only one part of diode and with the seccond part only touch the pad). Click on Connect (testpoint is connected), push Power on (if your phone is opened, you need to short to GND, pin12 from X3801 connector - located up by Joystik) and disconect testpoint (see message in the X65Flasher window). Click on Write flash and select location how is saved fullflash. Wait to finalyse...
4. Open Papuautils, go to the Codes menu and write manually 12345678 (or your old SKEY, if you have it) in skey space. Go to the Flash menu, check ReCalculate Keys (automatically checked the other three) and check Pause.
BE CARREFULLY FOR THIS SETTINGS, NOW YOU WILL WRITE THE BOOTCORE AREA!!!!
Connect testpoint and click on Do the Job!
Disconnect testpoint after mesage appair (Pause 3, 2, 1 - you have 3 only seconds to disconnect testpoint!).
Wait to finish, you will see the message: Boot released. Everything is closed.!

Connect again is Service mode (without testpoint) and see in the log if appair: Phone is in "Service Mode". SecurityStatus: "FactoryMode"
Go to the Normal mode (you need again to push shortly the Power key and see if your phone is started.
If your phone is started, that is...
dagos
 
the test oint does not appear and i couldn't see it i connect the scond point but the first is not appear in the attachment
 
...loocking to the "TP_SL75-2.jpg" (the seccond picture). Testpoint1 is located near by the SIM connector.
dagos
 
no i mean the first picture but the second is appear the first picture in your attachment
 
...go to "Flash" menu check only OTP, Pause and Clean BCore. Make testpoint and click on "Do the Job!". Fullflash (included bootcore)after using testpoint and X65Flasher. After fullflash, open again Papuautils, go to the "Flash" menu, ckeck only OTP, Recalculate Keys - all 4 options and Pause; nothing else! Make testpoint and click on "Do the job".
Search on my posts. To use this "special" functions from Papuautils, you need to know how to do it, because write in the bootcorearea and "Any function can kill the phone".
Regarding to the testpoint, see on the last picture sended by me.
That is.
This is my last explanation in this case, because I have to help the others.
BTW: If you don't repair using this steps, remain to use the martech box for repairing bootcore area.
dagos
 
...OK,
because you don't know how to use this testpoint, use the testpoint by BouRRi_GSM and connect to GND with the 10-50 ohm resistor.
dagos
 
Boot released.
Auto Ignition...
Transfer boot...
BOOT is loaded...
Pause 2 sec...
Getting Information...
Unknown flash type (ID:0000) or:
1) Malfunctioning TP.
2) Not all contacts in PMB and Flash.
3) Defective flash-memory.
4) Defective another part of phone.
5) Defective cable (adapter).
Boot released.
 
this is the error i tried many times



Quickpost this image to Myspace, Digg, Facebook, and others!


24180911oj2.th.jpg]
 
...I see this error. Not answer from loader -> Not maked testpoint or bootcore damaged (using new bootcore procedure). My oppinion; you need to erase bootcore and flash it again, but you need again to make testpoint....
dagos
 
Boot released.
Auto Ignition...
Transfer boot...
BOOT is loaded...
Pause 2 sec...
Getting Information...
FlashID: 0089,880D (64Mb)
Data are read through incorrectly!
€ € €
The information is incorrect!
HASH: 80008000800080008000800080008000
OTP ESN: 4522A357
OTP IMEI: 357017001680696
Incorrect BCORE or pure flash! Write down new BCORE all over again!
 
BOOT is loaded...
Pause 2 sec...
Getting Information...
FlashID: 0089,880D (64Mb)
Data are read through incorrectly!
€ € €
The information is incorrect!
HASH: 80008000800080008000800080008000
OTP ESN: 4522A357
OTP IMEI: 357017001680696
Incorrect BCORE or pure flash! Write down new BCORE all over again!
Calculation of keys...
Keys not found!
Boot in Service mode...
Press RED key (Power ON)!
Auto Ignition...
Transfer boot...
Boot Not loaded!
Boot in Service mode...
Press RED key (Power ON)!
Auto Ignition...
No answer to boot load!
Check port number, cable, phone, mode!
Checking values entered...
Calculate HASH and BootKEY from ESN and SKEY...
New HASH: 01F0B2412AB9C951A1E551AF128A6908
New BootKEY:1E3781477D98AD0703930E917B49D2AB
Boot in Service mode...
 
Back
Top