T2 not responding to screen taps

J

Juliet L

New member
One of our Agency's Palm T2 PDAs no longer responds to screen taps. I have hard reset it several times. I have also let it charge for 6 hours. The only suggestionon Palm's website is to perform a hard reset of let it fully charge for two hours.

Has anybody experienced this? It is no longer under warranty.


Thanks
-John-
 
John,

The most likely problem is that the ribbon cable between the screen and the motherboard has become loose or detached. Since it's not under warranty, just open up the back of the machine and reseat all the ribbon cables you can find. This should fix the problem.
 
Well it seems like the same thing it is going to happen to my palm pilot becasue when I press one part of the screen it is a bit of digitzer is off and I predict that sometime soon that my screen is going to give out and guess what's going to happen then... I got to get a new palm... Hopefully the Tungsten E2 is out or something but I would ask palmone.inc about that and you may be able to get it replaced.

TL - Hope this helps !
 
Back
Top