SX1 big problem

  • Thread starter Thread starter Mariusxzoner
  • Start date Start date
M

Mariusxzoner

Guest
I have a SX1 that don't start,it doesn't go in update mode when I try to put it in update mode or to power the phone I hear that noise of the battery.
I have a x55 serial cable and I wrote E-gold core with winswup but when the program finished the phone didn't start in update mode it's the same,what I should do know?
 
at first you must know that you need an USB cable to update or to flash your SX1
 
I have the folowing cables:
1.x55 serial cable
2.x55 cable usb to com emulation
3.original DCA 540 cable
Now tell me what to do
 
try thi solution...

flash these files with Joker... then go flash mode and flash with winswup with orj sx1 usb cable...
 
you must open the phone the speaker is up the board then take off the metal
cover the speaker is under you can desconect it without desoldring and try if
first of all the noise you hear is from the batry or in the speaker like (buzzzzzz) if its from the speaker you must flash and unlock it and update it
 
i ve repaired 2 sx1 with the same default it turn off after about 5 second after on in the startup at the siemens
1-i ve desconected and replace the speaker
2-after many times of flash flash with joker then it gives BUZZ the RECALC SKEY then flash with WINSWAP then it turns off in the menu or after 1 minute from the startup then i ve hot the IC litel bit
thats all
 
I've tried with joker but when I want to write it says: "Loading BootsModel(SX1)...
StartBoot does not loded!"
 
Back
Top