A
alk
Guest
I have had some problems getting my bike started. I have done some suggestion from here, clean my carbs, compression tests etc. I took off and cleaned the carbs over the weekend. I had to spray the air inlet with carb spray to get the bike running after installing them again which I expected since no gas was in the carbs. After it sputtered a few times enough fuel was in the carbs and ran by itself and ran fine. this thing is whenever I try to start the bike when its cold I have to spray carb cleaner in there to get it going, it seems as if not getting enough gas, new fuel filter. It starts just fine after it has warmed up with no carb cleaner. Any suggestions where to look would be very heplful!! Oh, I use the choke and it does no good.