Siemens MC60 full flash v10 with freia 10

  • Thread starter Thread starter drunlock
  • Start date Start date
D

drunlock

Guest
Here You can download it,
http://www.murmansk.net/~olg_ftp/v10/siemens%20mc60%20lg95%20v10%20-%2000200000.rar
 
Tnx,but I write this flash in dead MC60 v.10,after Unlock with "Use original IMEI" and phone still dead Why?
 
Hi friends!

I tryed to repair a MC60 phone with bzzzz, but after many flashing the finish (3 diff. flash and eeprom files) allways:
blue screen next white screen and final bzzzz and switch off.
The flash chip can read and writeable ,unlock log+map, original imei used wiewable good.
What is it , sw or hw problem?

BR Keni
 
Hello guy

I have one dead mc 60

Unlocking accidently with freja 10 and with A52 selected
Light 1s and nothing

write firmware with M55 tool and Mc60fubu version 04 totaly dead

write falsh siemens mc60 lg95 v10 - 00200000 and unlock with freja10
still dead

Now looking for 16mb MC60Martech file maybe it can help me !

Any other solutuion ?

Thanks in advance

Gilsie
 
You must flash phone with same full flash, which was before dead.
..... sorry for my english.....
 
can't revive mc60 with Freia 10 too.
after full flash and eeprom upload and unlock - compleatly dead (no bzzzz, no blue screen). Any solution?
 
http://www.gsm-multifund.de/Anleitungen/repair-all-new/fubu/mc60fubu.zip
another fullFlash
 
but this flashes can't help me. Can't revive dead mc60 with amd flash chip.
So i'm looking for working flash. please post link or send it to [email protected]
i'll put it to my hosting for downloading.
 
flash with martech ,repaeir eepron then unlock phone will work perfect.
tested more than 10 time 100% will work.
 
Take a working phone and read Firmware with MC60 Boot and flash this file (2MB to the dead one.

Now the phone will be alive again

BTW: Of course with Martech it is much more easier
 
Back
Top