S75 and FREEZE with Papuas..

  • Thread starter Thread starter hacktek
  • Start date Start date
H

hacktek

Guest
I have a S75 witch freeze when I press MENU!
It works well on many SIM card, but on some SIM just freeze when I press MENU.
I have the full flash readed with x65flasher, I have eeprom backup, bootcore backup!
I have the original ESN...
I flash it with another full flash, I tryed to use FREEZE method described by Papuas in Newbootcore.exe, but it always give me error when i try to Freeze in factorymode!
It says something like "Can't read SecurityInfo"..
When I try to replace 76,5008,5009,5077, it gives me error like: Can't read adress A0000......


So, I think I damaged the bootcore.
As I said, I have the bootcore backup with x65flasher, but when I want to restore it, it says "Can't write bootcore! Start the program using the "/b" option!" I started the program like "x65flasher.exe /b", but it gives me the same error! Could anyone help me out??
 
If I want to be more specific:
I flashed it with x65flasher with a FullFlash; After that, I Tryed FREEZE method described in NewBoot.exe. This is what x65PapuaUtilsV079e gives me:

Auto Ignition...
Transfer boot...
BOOT is loaded...
Pause 2 sec...
Getting Information...
FlashID: 0089,880D (64Mb) ...(Intel)
BCORE clean!
OTP ESN: 6228C2E2
OTP IMEI: 356702001618074
Write BCORE version: "main_1.0_V7"
BCORE enable...
New BCORE is written.
Do not forget to Freeze!
Boot released. Everything is closed.

after that, entered in service mode, and send Skey, it says:
Boot in "Service mode"...
Press RED key (Power ON)!
Auto Ignition...
Attention: For the new "S"75 work is done in Beta mode!
Transfer boot...
Boot in "Service mode" Ok
Awaiting Power On phone...
Getting Information:
Model: SIEMENS S75 23 lg4
Phone is in "Format FFS?" mode
IMEI: 356702001618074
SecurityStatus: FactoryMode
HWID: 400
Bcore model area is clean !!!
Accumulator Voltage: 4071 mV.
Accumulator Voltage: 4062 mV.
Checking values entered...
Test "Service key" (SKEY)...
Sending "Service key"(SKEY) to the phone...
SKEY entered!
Pause 1 second(s)...
SecurityStatus: FactoryMode

and that is happening when I try to freeze after I read the IMEI from phone:
SecurityStatus: FactoryMode
Getting Information:
Model: SIEMENS S75 23 lg4
Phone is in "Service Mode" mode
IMEI: 356702001618074
SecurityStatus: FactoryMode
HWID: 400
Bcore model area is clean !!!
Accumulator Voltage: 4029 mV.
Checking values entered and necessary blocks...
IMEI: 356702001618074
Impossible to get Security information!

I converted a FullFlash in UserSwup with Papuas, as described in AllBugSGold.exe; I flashed the phone with this UserSwup, then wroted a good FFS, then use the FFS format from x65flasher;
Now phone is alive again and working well, but still can't use FREEZE !method !
 
So man, have a cf75 under same condition. Did you have the solution to your phone? N suggestion.

thnks in advance.

rgds.
 
hello everyone,

i have one Seimens M55 when i'm insert sim card some time it accept some time not.

i'm insert 2 virgan sim card it accept 1 and other one not
then i try vodafone 1 acceppt other not
like i try many but same some r accept some r not

any one any idea what's problem is this

urgent need help
 
I have the same problem whit a M75...
maybe the new s-gold phone has some closed blocks
even if is in factory mode...
try to del bcore,eelite and eefull then renew bcore and
replace 76,5008,5009,5077.....and make the rest
 
Is the new Bcore I working on the Problem Please Read the Bcore and Send it to me
 
hello everyone,

i have one Seimens M55 when i'm insert sim card some time it accept some time not.

i'm insert 2 virgan sim card it accept 1 and other one not
then i try vodafone 1 acceppt other not
like i try many but same some r accept some r not

any one any idea what's problem is this

urgent need help
 
Mister, this thread is about S75.. Are you blind?
Can you read and understand English?
Get lost & go to M55 section...
Go to a GSM service!
 
What is wrong with you? This thread is about S75, and all kind of "sunday unlockers" are making spam to this thread!
Look at the subject of this thread onec again! I see it's wrote S75 and FREEZE with Papuas!
Did you see something with M55? Or am I blind?
I helped you very well, I draw your attention about you are in the wrong section.. Can U blame me?
If yes, I sugest you to go at the start page of this forum and read the RULES of this forum!
Thank you!
 
hi bro but i thing ur way of ATTENTION Are you blind?Get lost
is not good
any way's
thanks
 
Well it is better for all to calm down ! ...and be more polite !
But also NOT to post questions in non relevant places !

As far as the S75 and 079e PapuaUtils matter,
I suggest that it must be used either the Russian 079d or the newer German 09x ....

The English 079e or 079g are based on the Original - Russian 079c ...
There is a difference in 079d russian : it supports correctly the S75 regarding block 5123 at least... (which is not included in 079c or 079e...).

Maybe it will work all the way correct for S75, the mentioned 079d ...
But I can't know...
 
Back
Top