replacing damper pulley on 1990 Ford Probe?

  • Thread starter Thread starter Steve S
  • Start date Start date
S

Steve S

Guest
Crankshaft Damper
REMOVAL & INSTALLATION
2.2L Engine

Remove the accessory drive belts.
Raise and safely support the vehicle.
Remove the right front wheel and tire assembly.
Remove the right inner fender panel.
Remove the 6 bolts, damper and baffle plate.
Inspect the damper for damage and replace, as necessary.
To install:

Install the crankshaft sprocket baffle with the curved lip facing outward.
Install the crankshaft damper with the deep recess facing out and install the 6 bolts. Tighten the bolts to 109–152 inch lbs. (12–17 Nm).
Install the right inner fender panel and the wheel and tire assembly. Lower the vehicle.
Install the accessory drive belts.
 
This is proving to be a job indeed: Does anyone have experience with this particular aspect of my current project, or better yet know of a reference source which may enlighten me as to the proper method of extracting the puley without having to elevate the motor off of the mounts. Any website or point of reference would be appreciated.
 
Back
Top