To unlock by bluetooth
Use a Sharp GX25 unlocking program. There are a few available here on the forum. Or download here:http://www.schwantz-i.org/sharp.htm pass:i-ztnawhcs
Pair your GX25 with your PC and add a virtual serail port. This method will vary depending on what BT device you use.
[IMG]http://i666.photobucket.com/albums/vv22/boss_Jeff_2009/GX25.jpg[/IMG]
[IMG]http://i666.photobucket.com/albums/vv22/boss_Jeff_2009/GX252.jpg[/IMG]
Once this is done, go in on the GX25 and switch on BT
Now turn off your phone, remove sim, re-insert battery and power on again.
You should see the BT icon on your GX25
Now, start your unlocking software and select the port that your bluetooth device setup as your virtual com port
Select GX25 model and click unlock
Your phone should now change to screen with XXXX
Once you have this, follow the usual unlocking procedure
[IMG]http://i666.photobucket.com/albums/vv22/boss_Jeff_2009/Picture118.jpg[/IMG]
[IMG]http://i666.photobucket.com/albums/vv22/boss_Jeff_2009/GX253.jpg[/IMG]
Press 1
Now press 99
Then, press the upper right key (on the phone)
Press 3
Press the upper right key again
Press 1 when prompted...
Please wait at this stage until you see "finished" in the screen
Now press the upper right key 3 times to exit and your phone will switch off
Remove battery, insert sim card, re-insert battery and switch on.
Phone Unlocked.
PLEASE NOTE......A lot of bluetooth devices will assign hugh port numbers instead of eg...COM1, COM 2.......You might see COM 35 or COM 40 etc
If your unlocking program does not show port numbers this high, you need to go into device manager and force the com port to a lower number
[IMG]http://i666.photobucket.com/albums/vv22/boss_Jeff_2009/Picture119.jpg[/IMG]
