purge my sl45i failed!

  • Thread starter Thread starter modrone
  • Start date Start date
M

modrone

Guest
Hello!
I thought that I know something in sl45.
But I'm wrong!
I have firmware 56, that's OK.
I have downloaded a fubu v56.bin.
I wanted to clear all of patches on my phone and make my phone "new".
And put new versions of patches into a maid fubu, which I wanted to upload to the phone.
What have I done:
I Wrote fullflash with fubu for v56.bin (I patched some patches before I've done this to the fubu) with unisiemens.
Than I powered on and what happened?
There was a message box: Wrong software. Phone turned off!

I can't belive! I thought anything is stored in a fubu (the firmware too!)
I'm wrong!
What to do? Plz help.
I wrote back my old bin to flash, than my phone worked.

Thx for reply!
 
After applying this new fubu you just need to change phone's IMEI before you turn it on to get rid of this 'Wrong software' problem. Use KSIE 2 or Siemens Unlock 5.1 to do it.
Good luck!

HeCToR
 
No No No!
@Hector, he wrote that he still have his old Fubu...
Why unlocking? Why loosing battery parameters, profiles, t9 database................

@modrone
Take the new Fubu and flash it in your phone. Then open your old Fubu with V_Klay and flash only the EEP to your phone... It starts from Offset 0x5FFFFF to 0x600000

No need to unlock!
 
@cyperghost: Hmm, yes you are probably right, especially when the phone turns on after applying the old fubu. And off course battery parameters are very precious (I haven't made my copys myselft and now I regret it very often... )
Regards!

HeCToR
 
there's a better and more practical way:
Use V_Klay and write the new fubu only with the size of 5F0000. in this manner, the EEPROM area of your phone will be intact. for this purpose open your v_klay and go to the flasher part.
Press "read file...
 
Hello Friends!
Thanx for help, I have now my sl45 working with newly patched fubu!
 
Back
Top