Out of calibration touch screen.

D

drdes

New member
I dropped my almost new T5, damn..
Everything works except the touch screen is about 1/2 page out of synch with the actual screen. Tapping at the top of the screen references an icon about 1/2 way down. The worse consequence is that I can't access the sgraffiti area.
Is there any fix for this or am I out of luck.
Thanks.
 
You could try a hard reset but I'd bet that won't fix it.

If there isn't any apparent damage to the case of the T5 - you could contact Palm and ask for a replacement.
 
:eek: I know this is probably not what you wanted to hear, but if this were me, I would be contact PalmOne immediately for repairs or replacement. If it is in fact relatively new, it is still under warranty. I have not heard of any fix. :confused: I would not be surprised if repairs would involve taking it apart and that would undoubtedly void the warranty. :eek:
Carol
 
Thanks for your responses.
I found that with diligence, I was able to get the screen to align but it would be out of alignment again in about 1/2 hour.
On the Palm site it suggests running the corner of a piece of paper around the screen under the bezel about 1/8 inch, and it worked!
 
I had a problem where my Tungsten T would not sync with the stylus but a warm reset (hold the Up button while resetting) sorted it out.

HTH regrds

Peter
 
Back
Top