You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
nokia 6102 faceplate help
- Thread starter pres
- Start date
V
vyper
Guest
As far as I know, 6101 and 6102 are the same phone for different carriers. The 6101 faceplate will fit the 6102 w/o problems. Ebay has several available for next to nothing.
Replacement instructions:
Turn the phone off.
Open the clamshell.
GENTLY peel back the gray frame edge at the bottom of the LCD screen to access the screws. This is held on with sticky tape so be careful not to bend it up so you can press it back into place after you change the faceplate.. (try an Exacto knife or razor blade)
Remove the screws.
Gently remove the top cover and put the new cover in place, replace the screws and then press the sticky part back on the phone until it is smooth and even.
Done!
Replacement instructions:
Turn the phone off.
Open the clamshell.
GENTLY peel back the gray frame edge at the bottom of the LCD screen to access the screws. This is held on with sticky tape so be careful not to bend it up so you can press it back into place after you change the faceplate.. (try an Exacto knife or razor blade)
Remove the screws.
Gently remove the top cover and put the new cover in place, replace the screws and then press the sticky part back on the phone until it is smooth and even.
Done!
B
Bourn Identity
Guest
If you have a local shopping mall nearby, they usually have those little cell phone faceplate kiosks that should carry them and even put them on for you.
B
Bourn Identity
Guest
Cool