MC60 DEAD after wrong flash with joker

  • Thread starter Thread starter yurais
  • Start date Start date
Y

yurais

Guest
strange but real.

Dead, dead as a paperweight

I flashed the phone with a wrong firmware (I guess) when I started flashing joker told me something like Wrong Size or something and switched flash mode to Custom from full flash(I didnt notice this) I clicked Ok and it started and finished flashing.,

after that phone is totally Dead, no response to service mode, no response of any kind for flashing or anything.

Cut Track and the same

I cant believe it, I have done really cruel stuff to siemens and they never dies this way, this one, is deaf

Any suggestion ?

Resume, when you clicke Service button and joker wait for Power On button on the phone, after clicking the power button, NOTHING happens...
 
...bad news!
Possible you damaged the bootcore area. Try to use the cable with autoignition, Joker software, good fulflash file (download "MC60_0704_full_repair.rar" from http://eh.student.utwente.nl/~landy/index.php?dir=Repair_FuBu/ ) and unlock it after fullflash.
If not....remain only to use the Martech box to repair bootcore from your phone.
dagos
 
I have a TMS cable, can you tell me how to connect the autoignition function? because there is a IGN Pin on the PS2 connector I connected this pin to Pin 1 on siemens connector and it didnt work as autoignition and I tried different phones...

Any suggestion ?

Autoiugnition works great with the SonyEricsson cable.
 
...construct serial cable (see on atachemment), use C55 serial cable or Martech box (werry expensive).Not the other options.....
dagos
 
ok, but am I obbligued to make this cable? I do the same with my TMS already factory made cable witrh FTDI chip, better than max3232 or max232.\
 
...if you have schematic from your cable, you need only to adapt your cable to RS232 connector (RX;TX and GND).
dagos
 
I cant do this, FTDI is not a RS232 compliant IC, it's USB compliant, it is different and different schematics, more complex, I cant just adapt this cable to RS232

b ut thisi cable works with joker, read again the first post, I have done this 2 gnd, 3 TX, 4 RX and the cable works, BTW I flashed the wrong firmware with this cable, I have unlocked and back up firmmware fom differents phones with this cable.

the Ignition stuff did noot work, I dont know If I have to connect the resistor and diode from mthe TMS IGN pin to the pin 1, gotta try.
 
...you have USB to serial cable (like Siemens DCA510 cable) http://pinouts.ru/Converters/usb_serial_adapter_pinout.shtml
You needed to specify first....(I don't want to loose my time).

Modify your cable to have autoignition (see on attachemment).
Good luck!

dagos
 
Im sorry for not beeing clear enough, I thought I was.

dca uses CP chipset, TMS uses FTDI chipset

I'll take a look in the attachment.
 
I need to oknoow if this circuit is not already built into the TMS cable, anyoone here with a TMS cable with the Siemens Connector ?
 
Use Serail Cable No Probs I Think, If You Dont Have Auto Ignition Cable, Just Use 3v Battery N connect it (+) wire in PIN 1 ur serial cable connector before execute the joker (Flash n etc)
 
Back
Top