Kuryakyn Panacea back light system problem

W

wolfbane

New member
I have the Kuryakyn Panacea back light system (red glass) and I noticed the following problem. The center light now only works for the regular light. The brakelight nor the signal arrows work. The 2 side signal lights however do work in both brakelight and turn signal mode. I checked the fuses and wire connections and everything seems to be OK. The system is about 2 years old. Anyone have this problem or any thoughts on it. Thanks.
 
Your module may have taken a dooty. Being electronics they do go bad. Just replaced mine not to long ago.

When you mentioned you checked the connections did you mean to make sure they were tight or did also physically take them apart and check for corrosion?
Moisture is a rotten mistress.
 
I had a similar situation on my Kury Panacea light setup. The controller had gone bad, 13 months after I bought them (so just outside of the 12 month warranty). Kury wouldn't help, so I had to buy a new controller. Started having issues with that one right before I traded her in - I'm not buying any more Kury lights...
 
When I noticed it I had just ridden for 4 hours in a downpour and then it sat outside for another 2 days in continued rain. I took the connections apart and reconnected them, but didn't really look for corrosion. Sounds like a replacement may be in order. Thanks.
 
I sent an email to Kurakyn tech support. I'll see what they have to say, but after reading your response I'm not too optimistic. I'm way out of warranty anyway. Thanks.
 
Back
Top