I have a 2000 Jeep Cherokee sport and I have replaced the radiator 3 times (average lifespan 1.5 years). Every time it has failed at the top passenger side corner where the aluminum fins are soldered to the aluminum tube. NOT where aluminum meets the plastic.It was replaced by a professional with an OEM radiator. Is it possible that racking in the frame due to bad sway bar bushings or harsh Michigan roads could cause this problem. Same location of the break . I am not having over heating issues before radiator breaks.I am using correct coolant mixture.
I would like to add : this is the exact radiator that came stock on the truck not a knock off all 3 times ($150 from Hastings auto). I had my brother an ASE mechanic install it ( all 3 times).I just finished helping him install the new one. Easy procedure ! I will try a higher quality after market brand if this one has a problem.
I would like to add : this is the exact radiator that came stock on the truck not a knock off all 3 times ($150 from Hastings auto). I had my brother an ASE mechanic install it ( all 3 times).I just finished helping him install the new one. Easy procedure ! I will try a higher quality after market brand if this one has a problem.