i need cables for my Harley davidson 07 Fat Boy?

  • Thread starter Thread starter Bender A
  • Start date Start date
B

Bender A

Guest
hi i have an 07 Fatboy from Harley Davison and i am planing on adding a 1.5"big bufflow 16 inch ape hanger handle bars. and now i need to get the right cables for the cluch and brakes and the tube for the wires. the thing is i dont know was size to get. most ppl would go to the dealer for help but the dealer here in the med east isnt helpful at all. i will have to find what i need myslef and i dont know where to start
 
Try ordering else where they will need bar dimensions and riser size. It almost sounds like you have a ruff time at that. I have an employee who can not read a tape measure either no matter how hard iI try and teach him. So don't feel alone. Take it to a independent shop if you hate dealer.
 
Try ordering else where they will need bar dimensions and riser size. It almost sounds like you have a ruff time at that. I have an employee who can not read a tape measure either no matter how hard iI try and teach him. So don't feel alone. Take it to a independent shop if you hate dealer.
 
You REALLY need to go to shop. It doesn't neccesarily have to be an HD Dealer, it could be a reputable aftermarket shop. If you don't know how to measure for cable length, this is definitely not a job you want to tackle on your own.
Measuring for cables is not that easy, the throttle cables have different angled adjusters at the bar end of the cable, and the clutch cable needs to have the adjuster located in the right position. In order to replace the clutch cable, the exhaust will have to be removed in order to remove the transmission end cover to gain acess to the clutch release ball & ramp assembly. You will also need to extend all the handlebar/switch control wires, which will require removal of the fuel tank and since that has to be done, you may as well have the wires ran internally inside the bars.
SWITCHING OVER TO 16" APES IS NOT AN EASY JOB!!!

Where exactly are you, you mentioned med east...you mean mid-east as in middle east???
 
Back
Top