D
Dana M
Guest
...use the keyless entry? When I unlock the doors with the keyless entry, the horn doesn't sound. It's only sounds when I lock the doors
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
I have a 2004 dodge ram 1500 truck. How do I make it stop sounding the horn when I...
J
josh_11
Guest
unplug the alarm siren. should be fairly easy to get to under the hood.
B
being original
Guest
The dealer can program the horn to shut off but they will most likely charge you for doing. Here is the customer program feature out of the service manual and it is also found in your owners manual.
HORN CHIRP DISABLING / ENABLING
The horn chirp can be toggled using a DRB III® or by using the Remote Keyless Entry (RKE) transmitter that is already programmed to the vehicle.
To DISABLE (cancel) the horn chirp feature:
Enter the vehicle and close all doors.
Fasten the seat belt (this will cancel the seat belt chime).
Turn the ignition to the ON position.
Press and hold the LOCK button for 4 seconds. Within 6 seconds with the LOCK button still depressed, press the UNLOCK button. When a single chime is heard, release both buttons.
Turn the ignition OFF.
Turn the ignition ON or wait 60 seconds.
Test the horn chirp feature by pressing the LOCK button.
If a chime is not heard, program mode was canceled before the feature could be disabled. If necessary, repeat the procedure.
To ENABLE the horn chirp feature, repeat the above procedure.
HORN CHIRP DISABLING / ENABLING
The horn chirp can be toggled using a DRB III® or by using the Remote Keyless Entry (RKE) transmitter that is already programmed to the vehicle.
To DISABLE (cancel) the horn chirp feature:
Enter the vehicle and close all doors.
Fasten the seat belt (this will cancel the seat belt chime).
Turn the ignition to the ON position.
Press and hold the LOCK button for 4 seconds. Within 6 seconds with the LOCK button still depressed, press the UNLOCK button. When a single chime is heard, release both buttons.
Turn the ignition OFF.
Turn the ignition ON or wait 60 seconds.
Test the horn chirp feature by pressing the LOCK button.
If a chime is not heard, program mode was canceled before the feature could be disabled. If necessary, repeat the procedure.
To ENABLE the horn chirp feature, repeat the above procedure.
D
dodge man
Guest
you can take it to a dealer and they can program this part of it out ,but their the only ones that can do it especially if its a factory alarm system,there's also a wire you can disconnect from the horn but then it will cause the horn system not to work right,its best to let the dealer program this feature of the alarm system out of it,if it was an aftermarket alarm you would have the option of doing it your self,i got an after market system on mine and it has the ability to turn horn mode off,good luck.