I have a 1997 Chevy Blazer I need help with. (power steering pump)?

S

Speed

New member
Ok I'm trying to replace the power steering pump in my truck. I have the manual for the truck but it is not helping. I'm looking for a diagram of the bracket that's attached to the back of the pump. I got everything else off of it, but I can't figure out what else is holding it on. Can anyone point me to a diagram on how to get the stupid thing out?
I got the pully off and everything in front of it already. The front of the actual pump is wide open. I do see a black bracket that is behind it.
Awsome! Thanks Todd! I got that stupid bolt and got it out, your a life saver.
 
There should be one bolt that is mounted to the head.
It's a pain in the you know what to get at too.
The trick is to only loosen this nut enough to slide the pump out. Do not remove this nut! I was able to use a regular 3/8 impact socket and a 3/8 rachet to remove the bolt. The socket has to be put on first, then put the rachet on. The problem with this nut is there isn't enough room for a deep socket and shallow socket cannot be used with the rachet on the socket because the stud that the nut threads onto is a bit too long for that.
 
Back
Top