P
Pat B
Guest
signals not working properly.? I have no tail lights when brake is depressed. I replaced, flasher relay, dimmer switch, stop light switch ( one on brake pedal). I also replaced the Entire steering column. All fuses are good, all wiring seems to be intact and grounded correctly. Flashers work but are very dim and flash very quickly. tail lights come on occasionally but go out when brake is applied. only the third brake light works. I also cleaned the bulb sockets and replaced all the bulbs. Also if you turn on the turn signal after you shut if off you lose the tail lights, until you once again press brake and release, then they come on. I am at my wits end with this and would appreciate any thoughts. I also replaced the headlight switch as well. Please advise..I dont have much more hair to lose
as a side note, and not sure if it means anything. I noticed that when you apply the brake, the engine decreases in rpm (idle) , wehn you release the brake it returns to normal rpm
as a side note, and not sure if it means anything. I noticed that when you apply the brake, the engine decreases in rpm (idle) , wehn you release the brake it returns to normal rpm