i can't flash A35 pls help???

  • Thread starter Thread starter proxy_gsm
  • Start date Start date
P

proxy_gsm

Guest
Hi,
i have a sie a35 dead set but i can't flash the set by any software.Here i give Ksie by Nutzo software's above massage when i want to flash it:

COMM_LoadBoots : selected phone family is 1
TTY_OpenCOMPort : opening COM1
COMM_IsBootRunning : bootcode does not seem to be running
COMM_LoadBoots : Waiting to power on the phone ...
COMM_LoadBoots : phone is powered on
COMM_SendBoot : boot file 1 is not accepted

So pls help me how can i repair this phone.thx in advance.

proxy_gsm
 
@hakima,
i know man.................how to configure!if you have any other idea pls help me.

proxy_gsm
 
try using different software to write eg unisiemens or freia or check your cable
 
@Szabyyn/scrarfuss,
thx both of you for advice but for your information i already checked as you are say.
 
@Szabyyn/scrarfuss,
thx both of you for advice but for your information i already checked as you say but still same thing.so if you have any other idea pls send for me.thx in advance.

proxy_gsm
 
hi
Try soft on site http://sotinfo.ru/softwarepar/
use logger to make a a log, then a map, rewrite imei original and use ksie to flash and must work!
 
you have wrong configuration
download FREIA and in configuration section click Bootcore: Normal and click flash it
 
if you use Ksie by Nutzo you can only flash newer versions, I have unlocked C45 with this, but the CRC was wrong. Use FREIA, it is much better software
 
Deed You solve for problem? The same problem is with one A35 I have, and no idea for solving that.
Cheers
 
Defenetly something is wrong with phone comunication provided by CPU. I try to rehot CPU....the same again, boot file is not exepted. I take the flash chep from one a35 and replace hem in my a35.....and woila....everything is working perfectly.
So, if i help sombody don't forget to help anybody who ask You for help!!!
Cheers.
 
TRY!
Ziemens x3x Series Workshop 1.22 or
C30 Service Software for Flash A35
*you must hawe backup - full flash*
work for me:
 
Phone can't comunicate with PC becose of HW malfunction on CPU!!! You can't flash hem, with any of SW tools!!!! Only HW repair works, and You can change CPU ( but problem maybe is on PCB) or change flash chep!!! Just finde Your way.
Cheers.
 
I have A35 I was unlocking suddenly went power off. Please help. It reads software full but does not power on. version 20 and 25. I tried hardware but still no response.
 
@Farzina Manji,
did you try to unlock after flash?you should be unlock after flash otherwise you can't alive this set successfully.Also you have to check the original imei.

proxy_gsm
 
Guys, the same bug with this ancient handset. Firstly it was sim-locked, I was in hurry and made an attempt to unlock it via UFS3[Freia] and the phone died. Oops! The Log said: "Update is not accepted".
Now I'm trying to flash it with WinSwup - "Unknown Char 00 received" -> "Nothing received after BOT-Block2". In other words, WinSwup says the phone is definetely dead.
"All Siemens" while trying to read the Flash is saying the following (Like in TopicStarter's case):
COMM_LoadBoots : selected phone family is 1
TTY_OpenCOMPort : opening COM1
COMM_IsBootRunning : bootcode does not seem to be running
COMM_LoadBoots : Waiting to power on the phone ...
COMM_LoadBoots : phone is powered on
COMM_SendBoot : boot file 1 is not accepted

The configuration is OK. Nothing to configure there: COM1 and 57600.
So, any way to give a life again?
Btw, where can I get the Flash files for it, not WinSwup.

Thanks
 
Back
Top