Johnny Utah
New member
I regrettably took the belt off my indoor spinning bike, a Vision Fitness ES600. It was in an effort to fix a different problem but I cannot for the life of me get this belt back on the rear crank wheel. The belt is obviously designed to be very tight but there has to be some way to slip this on.
Edit: I run into a similar issue if I try putting the belt on the crank and then attaching the crank. Either way, the belt is so stiff that I cannot position it correctly.
If I attach the belt to the crank, I cannot get the crank into the proper position to reinsert the bolts that hold it in place. If I bolt down the crank and then try and attach the belt, the belt is too taut to get all the way around.
Edit: I run into a similar issue if I try putting the belt on the crank and then attaching the crank. Either way, the belt is so stiff that I cannot position it correctly.
If I attach the belt to the crank, I cannot get the crank into the proper position to reinsert the bolts that hold it in place. If I bolt down the crank and then try and attach the belt, the belt is too taut to get all the way around.