How to remove the rear window of my 2001 Dodge 1500?

T

the mysterious stranger

New member
put a blanket behind it and push it out or in it don,t really matter which way.
and take all the old glass out and reseal it later with the new window fitted.
it,s fitting the new one that,s inportant.
pretty easy but use a long strong single electrical wire all around the outside of the old window rubber this is to help you pull it through
so ending in the middle on the the bottom of the window and then drag on the wire first one then the other almost simultaniously have them both working if you can ther wise one at the time.
and have someone push the window while you pull the wire through
while you pull the wire the window follows and needs to be pushed and tapped to make it sit better .
but be carefull they are fragile so don,t hit the window in the middle but close to the edge and making an angle of inpact to steer it into position better
i hope it makes sense to you i have done done plenty of old round shaped windows for dodges.
if it helps use the warmer part of the day to make the rubber flex better for an easier fit.
 
put a blanket behind it and push it out or in it don,t really matter which way.
and take all the old glass out and reseal it later with the new window fitted.
it,s fitting the new one that,s inportant.
pretty easy but use a long strong single electrical wire all around the outside of the old window rubber this is to help you pull it through
so ending in the middle on the the bottom of the window and then drag on the wire first one then the other almost simultaniously have them both working if you can ther wise one at the time.
and have someone push the window while you pull the wire through
while you pull the wire the window follows and needs to be pushed and tapped to make it sit better .
but be carefull they are fragile so don,t hit the window in the middle but close to the edge and making an angle of inpact to steer it into position better
i hope it makes sense to you i have done done plenty of old round shaped windows for dodges.
if it helps use the warmer part of the day to make the rubber flex better for an easier fit.
 
I have a "2001" Dodge 1500. I broke one section of my rear window. How do I remove the window now?
 
put a blanket behind it and push it out or in it don,t really matter which way.
and take all the old glass out and reseal it later with the new window fitted.
it,s fitting the new one that,s inportant.
pretty easy but use a long strong single electrical wire all around the outside of the old window rubber this is to help you pull it through
so ending in the middle on the the bottom of the window and then drag on the wire first one then the other almost simultaniously have them both working if you can ther wise one at the time.
and have someone push the window while you pull the wire through
while you pull the wire the window follows and needs to be pushed and tapped to make it sit better .
but be carefull they are fragile so don,t hit the window in the middle but close to the edge and making an angle of inpact to steer it into position better
i hope it makes sense to you i have done done plenty of old round shaped windows for dodges.
if it helps use the warmer part of the day to make the rubber flex better for an easier fit.
 
put a blanket behind it and push it out or in it don,t really matter which way.
and take all the old glass out and reseal it later with the new window fitted.
it,s fitting the new one that,s inportant.
pretty easy but use a long strong single electrical wire all around the outside of the old window rubber this is to help you pull it through
so ending in the middle on the the bottom of the window and then drag on the wire first one then the other almost simultaniously have them both working if you can ther wise one at the time.
and have someone push the window while you pull the wire through
while you pull the wire the window follows and needs to be pushed and tapped to make it sit better .
but be carefull they are fragile so don,t hit the window in the middle but close to the edge and making an angle of inpact to steer it into position better
i hope it makes sense to you i have done done plenty of old round shaped windows for dodges.
if it helps use the warmer part of the day to make the rubber flex better for an easier fit.
 
put a blanket behind it and push it out or in it don,t really matter which way.
and take all the old glass out and reseal it later with the new window fitted.
it,s fitting the new one that,s inportant.
pretty easy but use a long strong single electrical wire all around the outside of the old window rubber this is to help you pull it through
so ending in the middle on the the bottom of the window and then drag on the wire first one then the other almost simultaniously have them both working if you can ther wise one at the time.
and have someone push the window while you pull the wire through
while you pull the wire the window follows and needs to be pushed and tapped to make it sit better .
but be carefull they are fragile so don,t hit the window in the middle but close to the edge and making an angle of inpact to steer it into position better
i hope it makes sense to you i have done done plenty of old round shaped windows for dodges.
if it helps use the warmer part of the day to make the rubber flex better for an easier fit.
 
put a blanket behind it and push it out or in it don,t really matter which way.
and take all the old glass out and reseal it later with the new window fitted.
it,s fitting the new one that,s inportant.
pretty easy but use a long strong single electrical wire all around the outside of the old window rubber this is to help you pull it through
so ending in the middle on the the bottom of the window and then drag on the wire first one then the other almost simultaniously have them both working if you can ther wise one at the time.
and have someone push the window while you pull the wire through
while you pull the wire the window follows and needs to be pushed and tapped to make it sit better .
but be carefull they are fragile so don,t hit the window in the middle but close to the edge and making an angle of inpact to steer it into position better
i hope it makes sense to you i have done done plenty of old round shaped windows for dodges.
if it helps use the warmer part of the day to make the rubber flex better for an easier fit.
 
Back
Top