How to add another receiver?

  • Thread starter Thread starter Dishedout
  • Start date Start date
D

Dishedout

Guest
Okay here is my setup, I have 3 x 3100 recievers, 1 HD reciever, 1 Dual LNB dish all hooked up to an SW-44 switch. everything works great and I would like to ad an additional reciever without adding any additional dishes. Possible? If so, how?

Thanks in advance great forum by the way.
 
Do the Bell boxes recognize a 4x8 switch?
if not, you can do it a few ways
another 4x4 switch, and 4 power passing 2way splitters, or
another 4x4 switch, and 2 3x8 switches
1st option, use the 2way splitters off of each lnb, and feed then the 2ways to the sw44
or use the 3x4's off of the lnb's, then into the 4x4
 
So what is a 4x8 switch, 4 in 8 out? And like i hate tv said will it recognize this switch when I perform the check switches function??
 
Not all Express Vu's firmware will detect and operate with Non-Standard switch's. I know that an older version of the 9200 software DID support the TERK 4 x 8, but a firmware update forced the customer to replace his switch for 2 x SW44's.
 
SW44a is NOT an approved Express Vu Switch and as such, may or may not work with this or future software....
 
Back
Top