HOW repair total dead Samsung Z-series

  • Thread starter Thread starter tedii1
  • Start date Start date
T

tedii1

Guest
I use Multidownloader 1.01 to flash ZV10 and error when flash boot loader. Now phone not power and not download mode (9+power). Please help me how I flash it.
 
Yep... that's a problem... i've searched everywhere - can't find... i need schematics/datasheet/pinout or other information about MSM cpu's - MSM6250, MSM6275... Just playng with jtag...
 
so. I havent hope to repair my unit.. =d... do u have any solution without BOX ??
 
You need compatible j-Tag interface for flashing dead Zxxx series , and must understand that j-tag interface are more complicated than usb or com port cables , offcource exist simple LPT jtag adapters but in this case they are noy compatible with 2.6V logic and work at small speed :-)
You must wait for box released by us or NS team ;-)


b.r NoName
 
Thank's mendoza,

But i have a problem, The boot zone of my Samsung U700 it's death, Have you a solution for repair Boot area?

B R
 
http://mslw.com/index.php?option=com_content&task=section&id=1&Itemid=4

Any experience with this solution?

Where are the actuel problems?
Reading the whole Memory is 100% possible?

Any solution available to 100% Dumb Memory over JTAG on MSM6250A based phones?

Best Regards
 
I have 2 Samsung ZV10's was flashing one and the same happened the phone went dead it will not switch on, is there anyway of fixing it or is it gone for good. I would be pleased to hear from someone if it is possible to repair thanks mi5rjs
 
Great to use FT2232 - quite easy to make box , but there are possible make box on single level converter :-) With free software ! Slow but free :-)
 
Dear Sir NoName@

I'm very interested in your post and website(z3x-team.com).

Please let me know as my understanding.

1. Your team developed "revive tool for samsung Z-series"
for dead Z-series phone.

2. its tool is called z3x dongle and price is 25US$ per piece.

3. its tool is used JTAG technology with 2.6V.

4. its tool can erase and write NAND area of Qualcomm MSM-chip.
(6250, 6250A, 6275...etc)

5. Model Z630, Z370 not released solution yet. because new model.

6. connect z3x dongle by using HDC1-connecter for Z540.
And for Z630 can use test point which located bottom-left
from the PCB main board near the USIM folder.

7. There is a way to contact your team only ICQ.

Is my understanding correct?

kind regards,
 
Back
Top