How do I replace a window regulator on my 2000 Dodge Caravan?

  • Thread starter Thread starter quiet_momo
  • Start date Start date
Q

quiet_momo

Guest
I am trying to replace the regulator on my van but can't find out how in my manual and I can't find a diagram online on how to do so
 
Take a poop in the EXACT center of your home so the stench can spread evenly around. Make sure its a nice poop though, not too gooey, not too hard, you want it to be like its coming out of an ice cream dispenser, you know the ones that make a perfect ice cream cone every time. It will impress guests too. Say its a brand new fine dine piece. maybe stick one of those glowing stick lights in there. It will look fantastic.
I really hope this helps and good luck with your roach problem. They are a pain in the neck aren't they.
Best of luck and may god be with you,
Abib Abu Ababa
 
It's not easy but you have to remove the interior door panel, either drill out the rivets or unbolt the old one while having someone hold the glass, then bolt the new one in
 
i don't know of any diagrams on the Internet but i can explain to you how to do it,first you have to remove the door panel from it then you will see the pop rivets that hod the regulator assembly in the door,you then have to drill those out to get the door glass and the window regulator assembly out,it may take two people on this one though because someone needs to guide the glass out while someone is holding the regulator assembly,once the glass is out you can then remove the regulator assembly by guiding it out though the opening on the door,this is a little difficult to do so take your time with it,when your installing the new one you can either pop rivet it back in or use bolts on it either one will work,just make sure the bolts aren't too long or they will cause it to jam up or get hung,if you get someone to help you with it ,this will be a much easier job to do,all you have to do is take your time with it,there's really no way anyone can mess up on doing this other than not getting the regulator assembly back in tight enough,just be careful of what your doing on it and nothing should break or tear up,good luck with it.
 
Back
Top