I cannot get the brakes to work on my daily driven car.
1988 Toyota Camry no abs rear drums
Symptom: brake pedal goes to the floor, no pressure in front left wheel and rear right wheel. This all happened after I REBUILT my 2 front calipers and tried to bleed the system.
- I changed the master cylinder (twice because the first I thought was a defective rebuild) I adjusted the push rod on the booster. I adjusted the brake pedal. Didn't work
FWD cars are split systems, front right wheel works with rear left wheel, front left wheel works with rear right wheel. diagonally.
- So, I changed my proportioning valve, and the little splitter block next to the master. didnt work
- Then I thought maybe the caliper rebuild kits were poor quality so I bought 2 new calipers. didn't work
- I replaced a wheel cylinder I found had a seized piston. didn't work
I've tried bleeding the car starting with the furthest wheel from the master to the closest, I tried cross bleeding it (because its a split system). I've put almost 2 liters of brake fluid through the system in attempts to get it to work. Ive tried just about everything...nothing works
Whats the next step, what am I missing.
Garage is not an option I've changed every piece that could have been faulty.
thank you
1988 Toyota Camry no abs rear drums
Symptom: brake pedal goes to the floor, no pressure in front left wheel and rear right wheel. This all happened after I REBUILT my 2 front calipers and tried to bleed the system.
- I changed the master cylinder (twice because the first I thought was a defective rebuild) I adjusted the push rod on the booster. I adjusted the brake pedal. Didn't work
FWD cars are split systems, front right wheel works with rear left wheel, front left wheel works with rear right wheel. diagonally.
- So, I changed my proportioning valve, and the little splitter block next to the master. didnt work
- Then I thought maybe the caliper rebuild kits were poor quality so I bought 2 new calipers. didn't work
- I replaced a wheel cylinder I found had a seized piston. didn't work
I've tried bleeding the car starting with the furthest wheel from the master to the closest, I tried cross bleeding it (because its a split system). I've put almost 2 liters of brake fluid through the system in attempts to get it to work. Ive tried just about everything...nothing works
Whats the next step, what am I missing.
Garage is not an option I've changed every piece that could have been faulty.
thank you