Help with my 96 ford explorer?

  • Thread starter Thread starter Jessica E
  • Start date Start date
J

Jessica E

Guest
I have a 96 ford explorer (v6) with 4x4 and the inside of the two front tires are wearing out very quickly. Can anyone tell me why? I was thinking it may be the shocks/struts, but I dont know. Please help!!
 
Have you had it aligned lately? Or maybe bad ball joints. Find a good front end shop and have it looked over! Good luck
 
Have you had it aligned lately? Or maybe bad ball joints. Find a good front end shop and have it looked over! Good luck
 
Have the alignment checked. The wheel alignment is crutial to the angle of the suspension of the truck to help optimize tire life. An alignment check may find that you have worn front end parts as well.
 
it might be your axis or it can also be the brand of tires because some cars have certain brans they need um if you where squalling the tires then that will wear them out
 
this should be a fairly simple answer
i meanlike, come on they even circled the problem :P

but no, have you checked your tire pressure it could be under inflated and doing what is called cupping i think..
the only other thing i could think of is if you got a tie rod adjustment or 4 wheel alignment.. but best to check tire pressure first ;) :P
 
this should be a fairly simple answer
i meanlike, come on they even circled the problem :P

but no, have you checked your tire pressure it could be under inflated and doing what is called cupping i think..
the only other thing i could think of is if you got a tie rod adjustment or 4 wheel alignment.. but best to check tire pressure first ;) :P
 
Back
Top