Ford Mondeo front disc removal?

R

[email protected]

New member
Hi all Mechanics, am having a nightmare trying to remove the front brake disk on a Mk2 Mondeo, nothing securing it, caliper assembly off, no securing washers/screws etc, have used heat, wedges behind the disk, lump hammers, WD40 etc etc. PLEASE any hints/tips/tricks?
Ty,
Rowdy.
 
mmmm,its a doozy.
well it should come off...only thing that will be holding it on is rust.
if your replacing the disc then i would just ''smash it off',its cast,it will brake easily...its the rust in between the disc and hub that's holding it...
BIG MELL,...smash it off.
 
Put a road wheel on the hub and hit the rim with a lump hammer from behind--use an old wheel if possible.The inner bearing track may be left on the stub axle but you can get that off later--try to hit both sides simultaneously by bridging across the rim with a block of wood or something similar
 
ok type how to replace rotors year ford Mondeo some are held in place by a large nut behing center dust cover some just slide off some have screws most you see wil be a dust cover you pry off and remove pin and nut which you can find by typing into search box
how to remove brake rotor
how to remove brake rotor video
how to remove brake rotor year of Ford Mondeo
 
Back
Top