DYNO Numbers for Baggers???

M

Meso

New member
Lee and Darrell are the best tuners in Western Canada/US. drive all the way from Calgary to have them tine my bikes. On the Jims 120 I had they got 131 hp and 134 tq. that was up from 120/121.

Last 2004 SEEG 103" they got me 109 hp and 113 tq.

Will be seeing them soon to tune my new 2101 ULTRA Limited if it does not snow.

geezerglide
 
Yes he is extremely happy with Jarz's tune. Lee and Darryl did the work and they
came highly recommended. We are very lucky to be local and have them available

We had a choice of tune options, Power Commander, SERT, SEST etc. Lee said
they were all decent options and he would tune using any of them, but he
preferred the Direct Link. So that is what we went with

We ordered a blank ECM from Jenny at Tri County HD, then had the local
HD dealer load a base map for a 2006 Ultra (props to Mountain View HD in
Chilliwack BC as they did this at no charge) then Lee tuned the bike and
created a new map using the Direct Link

I am now thinking of getting my 07 FXDSE 110 tuned by them as well. I have to be
able to keep up
 
Here's the whole shooting match:
Max power =119.72 Max Torque = 135.62
FLHRC Fly By Wire 08 117 Axtell Cyl 10.5 Comp TW6, SE 58MM TB, High Flow AC, D&D Fat Cats 2:1 (phantom to help with my OCD) with Quiet Baffles, TTS Tuner, 5.31 injectors, 71.27 F, Humidity 6% Yes, I know it looks like an Ultra, but it's a Dead Center Fairing and all the other bags, lowers, etc are MOCO; There is more in this bike than in my first house!

This machine runs like a top.... my Indy is a genius a great guy to work with and honest as the day is long....
 
Just got my bike back from being dyno tuned (and accelerator pump rebuild) Still has a flat spot at low rpm's like it want to stall if you punch it from idle, but they only took it to 5500 RPM's and it pulled 82 HP and 94 ftlbs of torque at the rear wheel. (that's the dyno flow comparisson, Standard was 76.2 hp and 88.7 ftlbs of torque or some shite like that)The tech said there is suppossed to be a restrictor plate on the end of the exhaust where there are removeable vent plates, probablt taken off for better sound by the previous owner. Any suggestions?
 
Back
Top