03 RKC, SE slip-ons, SE Airbox, SERT installed. Dynotune numbers: HP is 69.71, torque is 76.79. I can't say I was impressed with the results of $300.00 worth of Dynotuning. According to my chart, I gained 4.18 in HP and 0.98 in torque over the baseline readings they got from the stock SERT map I was originally using...
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
DYNO Numbers for Baggers???
- Thread starter Codey S
- Start date
Greek Gamer
New member
2004 FLTRI, stock engine run for baseline; 57.8 Max Power and 66.5 Max Torque.
Arlen Ness BS, Fullsac, Bub 7's, and SERT w/ a custom map by Trask Performance. Here are the numbers; 72.8 Max Power and 81.6 Max Torque. Nice improvement for a few add-on parts. Trask does all the Dyno runs for my bikes. Excellent people, and service. Very pleased.
Arlen Ness BS, Fullsac, Bub 7's, and SERT w/ a custom map by Trask Performance. Here are the numbers; 72.8 Max Power and 81.6 Max Torque. Nice improvement for a few add-on parts. Trask does all the Dyno runs for my bikes. Excellent people, and service. Very pleased.
carmella.2006
New member
First pass everything set to Neutral:
68.29 HP
86.95 ft/lbs torque
20 passes over 4 days later:
82.53 HP
95.07 ft/lbs torque
Gains:
14.24 HP
8.12 ft/lbs torque
I could have set it for slightly higher HP or torque numbers but would have had to get it on the cams earlier than I wanted or off the cams earlier. The way it's set now, no monster motor but a good, economical build with power and torque through out the rpm range and it cost me less than half of what a standard B.B. build costs.
Find yourself a tuner who will take the time and trouble to find the "sweet blend" for your combination and you'll be surprised what you'll gain.
68.29 HP
86.95 ft/lbs torque
20 passes over 4 days later:
82.53 HP
95.07 ft/lbs torque
Gains:
14.24 HP
8.12 ft/lbs torque
I could have set it for slightly higher HP or torque numbers but would have had to get it on the cams earlier than I wanted or off the cams earlier. The way it's set now, no monster motor but a good, economical build with power and torque through out the rpm range and it cost me less than half of what a standard B.B. build costs.
Find yourself a tuner who will take the time and trouble to find the "sweet blend" for your combination and you'll be surprised what you'll gain.
Who said I was talking to you?
Was pointing out simple physics
Torque = the ability to overcome Inertia
Inertia = The natural state of an object whether it be in motion or at rest.
Don't take things so personal. You sound paranoid, I don't care what you weigh dude.
And as far as wrenching goes.... I do ALL my own work.. Presently doing a frame up rebuild on my old Dyna.
We can put an end to this nonsense anytime you wish. You see, I am neither your friend or your enemy. Like always, it's your call.
Have a Bla Bla Bla...day
Was pointing out simple physics
Torque = the ability to overcome Inertia
Inertia = The natural state of an object whether it be in motion or at rest.
Don't take things so personal. You sound paranoid, I don't care what you weigh dude.
And as far as wrenching goes.... I do ALL my own work.. Presently doing a frame up rebuild on my old Dyna.
We can put an end to this nonsense anytime you wish. You see, I am neither your friend or your enemy. Like always, it's your call.
Have a Bla Bla Bla...day
Tom from the Top
New member
Funny, you're the one sounding paranoid.
You did copy, and then subsequently modified my signature which I've been using for months didn't you? And although playing the innocent party, you've refered to me as being fat and overweight numerous times along with making several comments about my lack of mechanical skills.
And that's just on this board.
I won't even go into that verbal tirade you threw at me a week or so ago.
BTW, Torque is the intent of a force to produce rotation about an axis.
As mentioned, You can end this nonsense anytime you want and no, it's your call and has been ever since I made the mistake of standing up for you when you were down and hurt.
So as you're so fond of saying... "Have a blah, blah, day.
Ball's in your court neither friend nor enemy.
You did copy, and then subsequently modified my signature which I've been using for months didn't you? And although playing the innocent party, you've refered to me as being fat and overweight numerous times along with making several comments about my lack of mechanical skills.
And that's just on this board.
I won't even go into that verbal tirade you threw at me a week or so ago.
BTW, Torque is the intent of a force to produce rotation about an axis.
As mentioned, You can end this nonsense anytime you want and no, it's your call and has been ever since I made the mistake of standing up for you when you were down and hurt.
So as you're so fond of saying... "Have a blah, blah, day.
Ball's in your court neither friend nor enemy.
Can't find my dyno sheet (I'll post it if I do), but the run done at Sabine Performance in Dallas for my 2008 Ultra are 70.7 HP and 84.2 torque at 3K. That's with Vance & Hines True Dual headers, Rush slip-ons and a Power commander 3 with HD standard ECU download. Plus SE stage 1 air cleaner and back plate. Actually I should have specified the info listed with a SERT ECM download for the proper PCIII download. I didn't know until later that the bike had a SERT download previously installed. The bike did loose the decel pops after the PC work. And it runs good. But it won't keep up with a 110 or even a 103. So, cams, big bore, or both?
Tom Barron
New member
My definition of torque is in relation to linear montion, and unless you do all your riding on a Dyno, was the point of relevance. But then again, any Califorina resident with an 2000 year bike and only 50,000 miles doesn't ride much anyway Mr Paraniod Google boy. Put the down the bottle and your two packs of smokes and go to a meeting dude. You're making a HUGE fool of yourself.
Before you respond with another " Verbal Traide", I wish to add, My Life, My Home, My Family and My Financial matters are none of your damn business. You could only hope to be as happy as me some day.
I suggest you stop stalking other men on the internet, it's just plain weird.
Get your last word in. I wash my hands of you (until you show up again)
My wife is going riding with her lazy a$$ husband. Heck, might even get her to buy breakfast too. (snicker snicker)
I feel sorry for you bro, I trully do. I know that are a good guy at heart, you should try to see the good in others.
Before you respond with another " Verbal Traide", I wish to add, My Life, My Home, My Family and My Financial matters are none of your damn business. You could only hope to be as happy as me some day.
I suggest you stop stalking other men on the internet, it's just plain weird.
Get your last word in. I wash my hands of you (until you show up again)
My wife is going riding with her lazy a$$ husband. Heck, might even get her to buy breakfast too. (snicker snicker)
I feel sorry for you bro, I trully do. I know that are a good guy at heart, you should try to see the good in others.