jerrod02_99
New member
I debaffled my 2006 Boulevard S50 this week and I wanted to let people know that it has a different baffle then the one I saw in the video. The baffle is at the end of the pipe. Basically, it is rivieted to the back plate that in the video you saw thru and remove.
When you look at muffler, you will see 3 bolts or rivets. If you drill thru these rivets, not unscrew but littlerly drill a hole where the rivet is, the baffle can be pulled out.
Pulling it out isn't easy and looking back it might be easier to follow the video and just drill the plate out. However, once you remove the plate, the baffle will slide right out. Once you have the Rivets drilled out, the baffle can either be pulled out or greased up with WD-40 and "spun" till it comes lose.
I'll put up pics of the baffle soon.
When you look at muffler, you will see 3 bolts or rivets. If you drill thru these rivets, not unscrew but littlerly drill a hole where the rivet is, the baffle can be pulled out.
Pulling it out isn't easy and looking back it might be easier to follow the video and just drill the plate out. However, once you remove the plate, the baffle will slide right out. Once you have the Rivets drilled out, the baffle can either be pulled out or greased up with WD-40 and "spun" till it comes lose.
I'll put up pics of the baffle soon.