Cleared New Flash? Prob on C75

  • Thread starter Thread starter dog_****
  • Start date Start date
D

dog_****

Guest
i have C75 V24 with Phonecode prob
i can backup it by x65flasher V2.103 but can't read phone, recalculate with PapuaUtils + TP(Flash phone in phone : Spansion S99-50085)

Log with PapuaUtils Ver1.1.1a :

Auto Ignition...
Transfer boot...
BOOT is loaded...
Pause 2 sec...
Getting Information...
FlashID: 0001,227E (32Mb)
Cleared New Flash?
OTP ESN: AC15008C
OTP IMEI: It is not written down or incorrect
Boot released.

Auto Ignition...
Transfer boot...
BOOT is loaded...
Pause 2 sec...
Getting Information...
FlashID: 0001,227E (32Mb)
Cleared New Flash?
OTP ESN: AC15008C
OTP IMEI: It is not written down or incorrect
Bcore R65 series found
Search of a segment EELITE...
Search of a segments EEFULL...
Find blocks: 52,76,5008,5009,5077,5121,5122,5123
In total EEP blocks: 234
Replacement of blocks EEPROM in the buffer ...
EEPROM: Block 76 replaced.
EEPROM: Block 5008 replaced.
EEPROM: Block 5077 replaced.
EEPROM: Block 5009 replaced.
Record of the changed blocks in phone...
Write down EEPROM segments...
Error of a code of acknowledgement of a command of deleting of a segment A0020000!
No acknowledgement of a command of write of a segment A0020000!
Write: addr:A0020000,size:00020000, buf:45 45 4C 49 54
EEPROM write down error!
Repeat operation!
i try Repeat with all ver papua 1.0.8, 1.1.1b,079f but have same result

Pls help!
 
Hi,
first give to me more detailes:
-which cable you use?
-in your phone now have empty flash?
-try to connect with papuautils, click on "Information" and post log file.
dagos
 
Thanks Mr Dagos for fast replay!
1. I use direct COM + Universal cable
2. Phone have in Phonedisable!phonecode(i thing it's not empty flash)
3. connect with papuatils :

Boot in "Service mode"...
Press RED key (Power ON)!
Auto Ignition...
Transfer boot...
Boot in "Service mode" Ok
Awaiting Power On phone...
No answer on?
Ping
Boot in "Service mode"...
Press RED key (Power ON)!
Auto Ignition...
Transfer boot...
Boot in "Service mode" Ok
Awaiting Power On phone...
No answer on Ping
No answer from the phone
Check port number, cable, phone, mode!

what is Prob?( i can backup it with X65flasher + TP)
 
...you not have connection. Verify cable or DirectCom settings.
Regarding to the phone lock message, you need only to unlock it using papuautils, enter in Service Mode, go to the "Various" menu and click to "5008 Phone Code"....
If you want to make backup from your phone, not use the testpoint procedure. Just calculate SKEY and BootKey with papuautils using code calculation methode or Java midlet and export config.ini file to the X65Flasher folder (click on "x65flasher.ini" tab).
If you not solve the connection problem, I propouse to use C55 serial data cable or DCA510 USB cable (modifyed).
dagos
 
Hi,
i try test this phone with C55 serial data cable but same result(all my cables work normal with other phone)
i thing it's HW prob bcs after service mode on soft, phone go sevice mode but soft can't read anything from phone.
with X65flasher i can read eeprom,bootcore,fullflash from phone, can i use this file(eeprom), recalculate with papuaultils without data from page Code then rewrite to the phone to unlock my phone?
or any solution for my phone?
Thanks Advance!
 
...maybe you have the hardware problems...
Try to rehot microcontroller (using hot air generator) and after try to unlock using papuautils (or fullash using X65flasher)....
dagos
 
Back
Top