chrysler 300 door panel removel?

J

jlee

New member
i need to replace a busted speaker in my front passenger door. how do i go about taking off the door panel without messing anything up...besides very carefully
 
ok I do dozens of these every week. First next to your door handle there will be a flap. Use a flat head, or a pick and pry that out, also underneath the armrest you will have the same setup, underneath these flaps there will be phillips screws. There are also 4 phillips screws underneath door panel. Once you have those out there are 3 round clips on the side of the panel, usually the ones you want are greyish. Push the inside of this clip into the door and then pry the out side off. Once they are out then grab the bottom of the door panel and pull up and out. Just disconnect linkage and wiring and remove panel
 
ok I do dozens of these every week. First next to your door handle there will be a flap. Use a flat head, or a pick and pry that out, also underneath the armrest you will have the same setup, underneath these flaps there will be phillips screws. There are also 4 phillips screws underneath door panel. Once you have those out there are 3 round clips on the side of the panel, usually the ones you want are greyish. Push the inside of this clip into the door and then pry the out side off. Once they are out then grab the bottom of the door panel and pull up and out. Just disconnect linkage and wiring and remove panel
 
Back
Top