CF62 and M55....not SIM recognized...help

[chatfan]

Hello people, I just tried to unlock CF62 and M55 E-Gold models, and everything seems to be OK, but when I insert any SIM CARD (including original one) not recognize any SIM CARD...always says: "Insert SIM Card".

I am 100% sure that I did a good CUT in the right place, I think is something while unlocking.

I tried to put EEP and BCORE backup back but problem persist, so, what can I do?

I uses SETOOL 3 Box like interface and RJ-45 Cable for this model.

Please, I need solution ASAP....

thanks for everything....



Here is my log:

****** Joker Siemens EGOLD Phone Version 0.3.5.6 Inofficial opened. ******
****** jueves, agosto 13, 2009, at 11:14:27 ******
Start...
Loading BootsModel(CF62)...
Sending StartBoot Ok.
Sending MainBoot Ok.
Com2 921600 BAUD: Ok.
SIEMENS CF62 lg95 Sw95
Soft FlashID: 0001/2212
FlashID: 0001/227E-2212-2200
Flash Size: 16Mb, WriteBuffer: 32 bytes
Region(1): Blocks 256, Size 64Kb
Start EEPROM segments at addres 0xFC0000
FSN: A7A215F1 -> PhoneID: F115A2A7
OTP IMEI: 353481006095942
HASH: 0B57BBBCED054D246C2F96B1A65292D4
Use OTP IMEI: 353481006095942
USE SKEY: 12345678
*#0000*12345678# - Network Lock
*#0001*12345678# - Service Provider Lock
*#0002*12345678# - Corporate Code
*#0003*12345678# - Phone Code
*#0004*12345678# - Network Subset Lock
*#0005*12345678# - Only Sim
Read BCORE addr: 0x800000 size: 0x010000...
BCORE backup in ".\Backup\CF62lg95Sw95_BCORE_090813111447.bin" file.
Write BCORE at addr: 0x800000...
Change BCORE HASH - Ok.
Read EEPROM addr: 0xFC0000 size: 0x030000...
EEPROM backup in ".\Backup\CF62lg95Sw95_EEPROM_090813111453.bin" file.
Write EEPROM addr: 0xFC0000 size: 0x030000...
Change BOOTKEY - Ok.
Change EEP0076 - Ok.
Change EEP5009 - Ok.
Change EEP5077 - Ok.
Change EEP5121 - Ok.
Change EEP5122 - Ok.
Change EEP5123 - Ok.
****** Joker Siemens EGOLD Phone Version 0.3.5.6 Inofficial closed. ******
****** jueves, agosto 13, 2009, at 11:15:53 ******

 

[chatfan]

no help? no ideas? please help me people...thanks in advance..

 

[DemnZ]

Seems like hardware problem ! Take a look on cut place . May be some waypoint was damaged .

 

[T0T0]

double check tp cut area... you cut it deeply..

 

[dagos]

...for M55, replace the SIM IC. Search on this forum to solution.
For CF62, I'm sure to you cut the way from the second layer
dagos