So here it is, many have asked for it, I have recieved over 100 PM's over this. So here goes!
Disclaimer: Niether I, nor HowardForums is resposible for damage to your device resulting from the use of this guide. This will not work on all Treos. The end result may be you needing a cable anyways. Diferent People have had diferent results. If you need a Treo flashed, try this before purchasing a cable. Please post your results here along with your Firmware Version, and Branding (Verizon, Sprint, etc.).
So here is what can happen, several diferent senarios.
1.) Useing my method you can get working web, text, and voice on your Treo without a cable.
2.) You can use this to get web working on a Sprint 700WX, end result may be that you need a cable.
3.) Your phone gets stuck roaming on VZW. You have two options, try the *228XX codes, or get a cable.
What will this method do for you? Change your PRL to the 5504 Roaming PRL, change your MSL to "333333", and program your NAM, and Data Provisioning to my settings.
Here is how to do it.
Download the file here:
http://techguy40.250free.com/Custom_nv.zip
First we will create a backup of your devices current config.
1.) You need to copy the files to a folder on the Treo, or SD card. Name it however you like.
2.) Run the CDMAFirmwareUpdater program. DO NOT HIT UPDATE YET!
3.) Press the left softkey, a list of options will pop up. Check "Back Up NV", and select your carrier, make sure that those two items are the only things checked.
4.) Hit update, and wait a few minutes. We are now backing up all of your settings.
5.) Navigate to the root of the phones file system, and find "NVBackup.dat". Save it somewhere safe. This is the backup that we just created.
Now to flash my Backup, and hopefully your phone.
1.) Copy my "NVBackup.dat" to the root of your phone, overwriting the backup we just created.
2.) Open the program, and hit the left softkey again. This time Select "Sprint" and "NV Restore".
3.) Hit Update, and wait it out.
4.) Reset your device when it completes, and try a *228, or dialing 611.
Now to set up the Data side of the phone.
1.) Hit ##DATA# for Sprint (VZW Code is diferent).
2.) Replace [email protected] with [email protected], password is "cricket". The Subsidy code is "333333".
3.) Find the XV6700 Wap settings to finish the data setup.
Thats it, your done. This has worked on 9 out of 12 Sprint 700WX's I have flashed.
Please post your results!
If you need a cable, I have two available at $50 shipped each.
Good Luck!
Disclaimer: Niether I, nor HowardForums is resposible for damage to your device resulting from the use of this guide. This will not work on all Treos. The end result may be you needing a cable anyways. Diferent People have had diferent results. If you need a Treo flashed, try this before purchasing a cable. Please post your results here along with your Firmware Version, and Branding (Verizon, Sprint, etc.).
So here is what can happen, several diferent senarios.
1.) Useing my method you can get working web, text, and voice on your Treo without a cable.
2.) You can use this to get web working on a Sprint 700WX, end result may be that you need a cable.
3.) Your phone gets stuck roaming on VZW. You have two options, try the *228XX codes, or get a cable.
What will this method do for you? Change your PRL to the 5504 Roaming PRL, change your MSL to "333333", and program your NAM, and Data Provisioning to my settings.
Here is how to do it.
Download the file here:
http://techguy40.250free.com/Custom_nv.zip
First we will create a backup of your devices current config.
1.) You need to copy the files to a folder on the Treo, or SD card. Name it however you like.
2.) Run the CDMAFirmwareUpdater program. DO NOT HIT UPDATE YET!
3.) Press the left softkey, a list of options will pop up. Check "Back Up NV", and select your carrier, make sure that those two items are the only things checked.
4.) Hit update, and wait a few minutes. We are now backing up all of your settings.
5.) Navigate to the root of the phones file system, and find "NVBackup.dat". Save it somewhere safe. This is the backup that we just created.
Now to flash my Backup, and hopefully your phone.
1.) Copy my "NVBackup.dat" to the root of your phone, overwriting the backup we just created.
2.) Open the program, and hit the left softkey again. This time Select "Sprint" and "NV Restore".
3.) Hit Update, and wait it out.
4.) Reset your device when it completes, and try a *228, or dialing 611.
Now to set up the Data side of the phone.
1.) Hit ##DATA# for Sprint (VZW Code is diferent).
2.) Replace [email protected] with [email protected], password is "cricket". The Subsidy code is "333333".
3.) Find the XV6700 Wap settings to finish the data setup.
Thats it, your done. This has worked on 9 out of 12 Sprint 700WX's I have flashed.
Please post your results!
If you need a cable, I have two available at $50 shipped each.
Good Luck!