C90 Risers

[04 28 12]

Hi everyone, just traded my C50 in for the C90. I had Phat 4" 3/4 pull back risers on my C50 and had to move the brake line to the rear of the T T. With the C90 I do not want to have to move or replace the hy lines. I do need to have the handle bars up and back some can someone tell me which risers you used and not have to change or move your lines.

 

[burberryicon]

I put on show chrome 4"x1". The front brake lines are OK, had to move the cluster a bit. The clutch line is tight even with moving the left cluster but manageable. I am going to go with 4" over stock this winter though.

 

[johary m]

OK Thanks frostbitevinnie. The risers on the bike stock are 2 1/2 high. So if I went with 4" 3/4 I should be ok right. I know I can get 2" spacers and the rake pulls them back 3/4" but I am not sure how they would look.

 

[Baby Wong ™]

Like I said, the clutch line will be tight, you will have to move the cluster. I am going to change mine to remedy this by buying these. Clutch is about $70, front brakes about $145.

 

[idiotzaint]

I was surprised how well Jim's spacers did on my C50, and not expensive either

Jim's Spacers

 

[Rubluffin]

I ordered a set the other day $17.00 not bad if they look good and do the job.

 

[The Gold Standerd on ECW.]

It blends in well, and I have not had any problems.

Do not take the handle bars off though until you loosened the bottom bolts. It will help alot to break the nuts loose.

 

[LzBlz]

LOL, Been there done that. No what you mean. Thanks.

 

[Roddy]

I just ordered a set of Jim's Spacers for my C90... Hopefully they'll do the trick...

 

[fender_gurl_1991]

Just reporting back, Put the 2" extensions on and they look great and with the rake of the bike pulled them back just enough so no lines have to be moved.

 

[Nami Cullen]

My bike is stock on that end, but I would have gotten all that done before /or in the trade agrement!!!

 

[Marzipan]

I bought many a bike in my time and never had or seen a stealer change the risers in the bike, You can barter for accessories which I have pleny times but the risers are a personal choice for each rider.

 

[C-is-for-cookie]

And labor is not usually part of including accessories