C72v Dead after Unlock

  • Thread starter Thread starter Indus
  • Start date Start date
I

Indus

Guest
Unlocking Log is OK



When i try to do AllbugsGold without TP.
Coz keys are already calculated.
it gives Error on this stage.
 
PS
if i need to flash it with x65flasher which files must ne placed in same folder?
plz upload all needed files here,

TIA
 
with TP error

BOOT is loaded...
Pause 2 sec...
Getting Information...
FlashID: 0001,227E (32Mb) ...(amd)
C72V SIEMENS 357364005018980
HASH: 72EC63D6118BB42A63CA48C420F43FD7
OTP ESN: 1E8F62EB
OTP IMEI: 357364005018980
Established speed 921600 Baud.
It was BCORE version: "main_1.0_V26 "
Write BCORE version: "main_1.0_V26 "
No answer to command to receive data A0000000!
Error writing segment BCORE!
Try again !
 
...ufff!
You make, manny,manny wrong steps.
To solve:
First, you need to set baudrate of COM to 115200 bauds, not to 921600
Second, if you use the AllbugsGold procedure, you NEVER connect to your phone with the normal way....only with TP.

So, download X65flasher, one good fullflash of Siemens C72V phone (for AMD flash) and papuautils 1.1.1c.
- start x65flasher with the DOS command "x65flasher /b" (enable bootcore writing).
- connect your phone, set baudrate, COM and testpoint option.
- click on Connect, make testpoint, push shortly on the phone red button.
- after ignition, disconect testpoint (have 3 seconds). On the down part of window you will see C72 bootcore identification.
Now click on Flash button, load fullflash file (from where you saved) and click on OK. Confirm the bootcore writing and wait...40...50 minutes

After finishing, close x65flasher and open papuautils.
Go to Flash menu, set COM, baudrate.
NOW CHECK ONLY ??????OTP, Recalculate Keys - in Flash (automatically is checked other 3 options) and Pause. NOTHING ELSE!!!
Click on Do the Job! quicly make testpoint and push on the phone red button.
See on the right window, disconnect testpoint and wait to finishing (2 minutes).
Now close papuautils, disconnect cable and...power on your phone

If you make exactly the all steps, your phone start and working.
That all!

dagos
 
PS
i flashed it with x65flasher 2103
http://eh.student.utwente.nl/~landy/downloads/Repair_FuBu/C72_FF.zip
 
yes confirmed followed 100% ur steps.
even run x65flasher with cmd with /b switch.

but log is same.
 
...of course, you use the C72 fullflashfile (for Intel flash)....
Inside in your phone you have the AMD flash chip, not Intel.
You have two choise:
1. Replace your flash chip with Intel flash
2. Find fullflash file for AMD, not Intel

dagos
 
Back
Top