E
emso
Guest
hello ihave a problem with c72v which had a blue display i tried fullflash with papuas but it's always the same i did the allbugsgold method forrepairing dead phones but it's the same again is ther any contrst tooll in papua like there is in joker here is the information i got from the phone:
Model: SIEMENS C72 16 lg3
Phone is in "Normal Mode" mode
IMEI: 35736300416xxxx
SecurityStatus: FactoryMode
HWID: 5005
Accumulator Voltage: 3820 mV.
Additional Information:
Code(05): OTP is Closed for write
Code(09): BootKEY is stored in EEPROM
Code(0D): Keys are stored in BCORE
Code(12): Full access to BFC functions
Code(15): Full mode (not SC)
Code(19): Monitoring is ON
Code(1D): Blocks 512x are present
EELITE Info:
Free buffer 110392 bytes, free at all 111244 bytes, free for deleted 111244 bytes.
EEFULL Info:
Free buffer 106854 bytes, free at all 206425 bytes, free for deleted 75385 bytes.
MAP info:
Date: 23/10/05, Variant: B 405,
Std-Map/SW: 1/16, D-Map/Prov.: 5/137
Factory (OTP) IMEI: 35736300416xxxx - matches to flash data.
Minimum number of firmware: 16.
BCORE version: "main_1.0_V26 ". - (v35).
Phone operated: 77 sec.
Total Talk time: 0 sec.
FlashID(1) - Manufact. code: 0089 (Intel), type: 880D.
DisplayID(1,40): Sharp Sharp LH15KAH2.
and when i read the contrasst from the phone i get:
EEP5007: 7F 7F FF FF
Block "Contrast" read successfully.
but if i try to change data nothing hapens
someone who can help????
or you think its hardware damaged???
i was told that c72 has 2-3 types of displays does someone know what are the right setings in papua contrast tool for sharp display
Model: SIEMENS C72 16 lg3
Phone is in "Normal Mode" mode
IMEI: 35736300416xxxx
SecurityStatus: FactoryMode
HWID: 5005
Accumulator Voltage: 3820 mV.
Additional Information:
Code(05): OTP is Closed for write
Code(09): BootKEY is stored in EEPROM
Code(0D): Keys are stored in BCORE
Code(12): Full access to BFC functions
Code(15): Full mode (not SC)
Code(19): Monitoring is ON
Code(1D): Blocks 512x are present
EELITE Info:
Free buffer 110392 bytes, free at all 111244 bytes, free for deleted 111244 bytes.
EEFULL Info:
Free buffer 106854 bytes, free at all 206425 bytes, free for deleted 75385 bytes.
MAP info:
Date: 23/10/05, Variant: B 405,
Std-Map/SW: 1/16, D-Map/Prov.: 5/137
Factory (OTP) IMEI: 35736300416xxxx - matches to flash data.
Minimum number of firmware: 16.
BCORE version: "main_1.0_V26 ". - (v35).
Phone operated: 77 sec.
Total Talk time: 0 sec.
FlashID(1) - Manufact. code: 0089 (Intel), type: 880D.
DisplayID(1,40): Sharp Sharp LH15KAH2.
and when i read the contrasst from the phone i get:
EEP5007: 7F 7F FF FF
Block "Contrast" read successfully.
but if i try to change data nothing hapens
someone who can help????
or you think its hardware damaged???
i was told that c72 has 2-3 types of displays does someone know what are the right setings in papua contrast tool for sharp display