c55 partial soluthion free

  • Thread starter Thread starter emilio
  • Start date Start date
E

emilio

Guest
Greekoff - what is you stupid mistakes ????
with me all stoping too when sending main boot?

help please where i be mistaken?
 
You can write lang packs with Maxims C55 tool if you clear the resistor! How do you put it back? Why should you put it back?
 
Hi all
download it to

http://groups.yahoo.com/group/Omega_gsm/files/

write file to c55 as firmware - and phone unlocked but with LP91

for change LP use read/write language

Best regards from OmegaGsm Andrey
 
Ok, I have some questions now that I have downloaded the file:

1- First thing remove the resistor (testpoint) refer to http://groups.yahoo.com/group/Omega_gsm/files/c55-testpoint.jpg for picture.

2- Read eeprom area and language area (if you want to have same LP) and save it. (You can do a full backup of the phone but in mine doesn't work???why??)

3- Write firmware area with the file provided.

Now the questions: Do I have to write back to the phone the eeprom and the language areas that I saved???
And what about if I have a phone with wrong software, if I put the eeprom from another workin phone willl it work?? or any aidea on how to have it back alive again??

Please answer if possible, I just downloaded the file and I'll test it tomorrow morning and then post the results, thanks all for our help and support.

Regards ... V@linuXX
 
I have my language "croatian" downloaded from phone,if you can upload it that way i will send you.
 
Hi!
What happens if I downgrade an original V18 flash to v14.
As I read the phone should be dead,but,if I read fullflash chip from a phone with v14 and write it to the phone with v18 it should work,no?
(Of course I write my backuped eeprom to...)
 
I want to confirm that if you change te firmware the phone will be locked again, because the unlocked firmware that comes in c55unlock.rar is patched in a way that the firmware itself doesn't read the eeprom to verify if the phone code is locked or no (like a patch for bypassing conditionnal jumps in cracking protected softs), so there is only one way to have the language you want is to see the right firmware version (because there are at least 3 or 4 subversion in v14 firmware) and to write the correct language area, so please if anyone have an unloocked phone (I mean unlocked with this partial solution) and have a workin language pack with it, please give to all.

Cheers, Valinux!!!

PEACE FOREVER NO WAR!!!!
 
can anyone upload the file to http or ftp server cause yahoo groups has timeout less than the time I need to download the file, or maybe you can split or send it by mail to [email protected] !!

Thanks friends!
 
@emilio

1.You have the backup?
2.which type of category (expl: firmware, flash, eeprom...) uploaded the patch bin?
3.You can try flash via winswup?

BR Keni
 
ok!

but when you take out the resisior, its broken (resistor)

1.) where do you get such a resistor?
2.) its hard to solder this resistor

you must use logger to unlock because its better (SW18!!)

with the partial you have SW14

regards SADE
 
Back
Top