c45 BA20 dead help plz

  • Thread starter Thread starter moustafatch
  • Start date Start date
M

moustafatch

Guest
i try to flash c45 BA20 but i can't saccus also the eeprom is damedge now i can't flash the phone with all3/4 but it make the pc freezing when it be i think 65%

i can flash the phone with winsuwp but how i can write eeprom BA20 and which software i can use to write the eeprom for BA20 phone.

thanks for help
 
Hi,
Use ksi soft,read full flash from working phone & write that file to damaged phone.After that write imei,your phone will be ok.
Regards.
Mobileclinic
 
i try but i didn't saccuss i flash the phone but the proplem with the eeprom coz i think i can't write the BA20 eeprom useing unisiemens.

any one help me plz my mobile dead and i don't know what i can do
 
Hi,
You can download ksi soft from my group-http://groups.yahoo.com/group/mobileclinic2001
To paraziti,I don't have flash for C45ver35,i have only ver 14.
Regards.
Mobileclinic
 
I got v31, v35, v38 all Lg 05 T9 10. (can send you by mail)
I also got v50 (Lg 01 T9 01) for download at my site.

Get me by MSN or ICQ
ICQ # 231986019
 
Hi,
I have repaired many c45ba20 with ksi soft.Make backup from working phone with ksi,write that file to damaged phone.now your phone is with ligth blinking on display.Write imei all will be ok 100%.
If you have any problem contact me on icq-146946267.
Regards.
Mobileclinic
 
Hi,
I have also uploaded full flash file for c45 on my group.
Download & repair 100%.
Regards.
Mobileclinic
 
finaly i get working phone c45 BA20 i try to read the full flash with kasi and when i try to write it to my dead phone c45 BA20 it say for me :

COMM_LoadBoots : selected phone family is 2
TTY_OpenCOMPort : opening COM1
COMM_IsBootRunning : bootcode does not seem to be running
COMM_LoadBoots : Waiting to power on the phone ...
COMM_LoadBoots : phone is powered on
COMM_LoadBoots : internal loader version is 00.01
SEC_RecreateIMEI : invalid decoded IMEI
COMM_LoadBoots : original IMEI (2) is corrupt
COMM_LoadBoots : found SIEMENS C45 lg3 v31 (1)
COMM_LoadBoots : flash ids are 002088BA [002088BA] - BA20
COMM_LoadBoots : phone ids are 2AD23496 [2AD23496]
COMM_Write : using D:\SIEMENS\ALL-SIEMENS5.1\ALL-SIEMENS5.1\SIEMENS C45 LG1 V31 - 00C00000.FLS
COMM_Write : startaddress is 00C00000 end is 01000000
COMM_Write : adjusted startaddress is 00C00000 end is 00FFFFFF
COMM_NormalWriteFlashBlock : write is not accepted

i try to flash the phone with winswup and i try again to flash with kasi but still the same.

some one help me plz
 
@moustafatch

Hi
what happen when u have flash it with winswup ?
Try to charge battery phone and flash it again with winswup.

If you pc is freezing with all3/4 ,try to format your hard-disk and reinstall windows 98 se.
Then write good eeprom and flash phone with winswup,
make log file with logger 4.02 and sent me the log file, i will make map file for u.

Hope this can help you.


Cheers
yash
 
Hi,
Select start address 0x000000 in ksi siemens tool & upload full flash file from my group,all will be ok.
Regards.
Mobileclinic
 
Use All 3/4 Siemens Service v2.0.5 (cracked by Xak)

1. Load *.flx file
2. Select COM Port and mobile type
3. Check option "Write Flash"
4. Check option "Write IMEI"
5. Check option "Burst Mode ( 10% faster )

Now you are ready to flash the phone...
6. Press "Init Mobile" and follow the program instruction's

Afther flashing you need to read LOG file from phone and create a MAP file...

7. Use "Siemens IMEI Writer, Version 3.00"
 
Hi Kazak,
From my group you can only download ksi soft only,because I had removed flash file from my group.Read full flash from good working phone & write that to damaged phone & write imei.My group is-http://groups.yahoo.com/group/mobileclinic2001/
Regards.
Mobileclinic
 
Try this:

1. Swup any ver. Exampl v.35
2. Read *.ldb (LogReader v.1.1)
3. Generate *.ldb to *.lc
4. Upload Phone (LogUploaders software ver.1.1) with "Write Def. EEPROM"

My method 1000% working.

WBR, Karateka.
 
Back
Top