Y
Yootsin
Guest
be replaced? Ok done a bit of PC fixing like adding ram, changing cpu and such and decided to build a pc later this year, just wanted to make sure all these part would work together...should do
oh btw when is socket T going to be replaced?
motherboard: MSI P7N Zilent *Zalman Limited Edition* Bundle S775 DDR2 750i 3xSLi, GbE, SATAII, 1333FSB
CPU: Intel Core 2 Quad Q6600 G0 SLACR, Kentsfield Core, Socket 775, 2.40 GHz 1066MHz 8MB Cache, Retail
RAM: 2GB (2x1GB) Corsair TwinX XMS2, DDR2 PC2-6400 (800), 240 Pins, Non-ECC Unbuffered, CAS 4-4-4-12, DHX
Graphics: 512MB Asus 9600GT, PCI-E 2.0, Mem 1800MHz, GDDR3, GPU 650MHz, Stream 64, 2x DL DVI-I
psu:750W TX Corsair PSU, single 12V rail, energy efficient, quiet & cool, fully compatible,5 yr warranty
hard drive: 250 GB Samsung HD250HJ Spinpoint, SATA II, 7200 rpm, 8MB Cache, 8.9 ms, NCQ
DVD drive: Asus DRW-2014L1 20x DVD±R, 8x DVD±DL, DVD+RW x8/-RW x6, x14 DVD-RAM, PATA, Lightscribe,
I could get the Q9650 and 8800gt but I'm on a budget
motherboard: MSI P7N Zilent *Zalman Limited Edition* Bundle S775 DDR2 750i 3xSLi, GbE, SATAII, 1333FSB
CPU: Intel Core 2 Quad Q6600 G0 SLACR, Kentsfield Core, Socket 775, 2.40 GHz 1066MHz 8MB Cache, Retail
RAM: 2GB (2x1GB) Corsair TwinX XMS2, DDR2 PC2-6400 (800), 240 Pins, Non-ECC Unbuffered, CAS 4-4-4-12, DHX
Graphics: 512MB Asus 9600GT, PCI-E 2.0, Mem 1800MHz, GDDR3, GPU 650MHz, Stream 64, 2x DL DVI-I
psu:750W TX Corsair PSU, single 12V rail, energy efficient, quiet & cool, fully compatible,5 yr warranty
hard drive: 250 GB Samsung HD250HJ Spinpoint, SATA II, 7200 rpm, 8MB Cache, 8.9 ms, NCQ
DVD drive: Asus DRW-2014L1 20x DVD±R, 8x DVD±DL, DVD+RW x8/-RW x6, x14 DVD-RAM, PATA, Lightscribe,
I could get the Q9650 and 8800gt but I'm on a budget