**BB GSM Exact Pinout for UniversalBOX of X65 Cable**

  • Thread starter Thread starter Amir-SkillZ
  • Start date Start date
A

Amir-SkillZ

Guest
Respect
BB GSM
Plz can u or anyone Post the Pic of exact pinout for universalBOX (110 cables)....The cable in It when i insert it to a Powered C65 it goes off and Universal Box shows the redlight...Whats Wrong ..i have tested on 3 phones..same Red Light...Some says i need to Chnage the Pinout and put some Resister as well Kindly post the Simple Picture for Unibox thankx Alot
 
Sorry I havent got that box, dont know what does that red light mean ))

There must be a short circuit somewhere in the cable somehow ..

Just cut x35/45 cable, open the cable to phone connector and compare with pinout (shown below)
Remember cable colours (Rx,Tx,GND) and connect with new wires on x55 connector ...

So you`ll have 2 phone connectors in 1 cable (But dont use these to at the same time )

KeyBoard UP
1 ........... 12

X55/65: 2-GND, 3-Tx, 4-Rx
X35/45: 1-GND, 5-Tx, 6-Rx

Regards,
B
 
Great HELP to U ALL THANKX
But Doing this
X55/65: 2-GND, 3-Tx, 4-Rx
Box shows Red light and Phone Goes Off...So i Connect GND to PIN7 now I wont Give redlight if phone is off....But when conencted to poweron phone it Goes Off.....Now WHAT
 
the unibox has prob in the serial port with the siemens cable. as soon as u put the cable in the unibox the the red light glows and the siemens set went off ( if its on), and not work to any sw.
on the other hand u can use the other port (fidi port) with this cable. without any prob.
br
 
and I dont need to change the pinout *** well ??? as i got i above posted ....Will give it a Try see told ya there is problem...thankx RarePearl for letting them know i am not Alone having this Weird Problem...one thing else....i can Flash with that cable on com1 using x65 flasher no problem.....why.......can u post the pic of ur UNI box Siemens Cable here ...PLZ...Me wana see the PINOUTS u got.....
 
Back
Top