Back this time a different problem Mazda 626 again please help.?

  • Thread starter Thread starter rcat1777
  • Start date Start date
R

rcat1777

Guest
My Passenger Side Automatic Seat belt will not go up or down, I cannot find any problem with the Fuse or the Motor, Is there a Relay for this particular Seat belt? Any help is appreciated.
Hey thanks for the Anwser but this is for Standard Seatbelts, Mine are automatic, They are on a track that go up when the door is closed and go down when the door is opened. It's not doing either right now.
 
There is more than one fuse!Plus,you may even have a fuseable link on the belt its self.Have you tried spraying with wd-40?I don't really like using it myself but,it's not as messy as grafite.Anyway you should have a fuse under the seat(or a link)butI'd say since it's just one side try the wd-40 first and when you open the door or hit the iginition give the belt a little help.Possible it just jumped track.Good Luck!
 
Hey there,
the seat belts have a self retracting spring that can go bad over time. I have a feeling that yours went bad. You can buy a new one from online or from a junk yard, but i am not sure how easy or how hard the replacement is. You can remove the plastic panel by pulling on it that covers the belt and see if you can make sense out of it. To do that you will have to remove the panel on the foot panel and then pull on the other one. Hope that helps. Thanks man.
 
Back
Top