I have an old Atlas 322 (A3222E) snowthrower with a 3 HP briggs sno-gard. I believe its from 1987. I always noticed that the auger would try to move occassionally with the old belt, and now that I replaced the belt, the auger always moves at full speed. Its starting to score the new belt. The tensioner cable is on its loosest setting, and i had pulled the tensioner before and greased the bolt and the pulley. I also put 3 in 1 down the jacket for the tensioner cable. Does anyone have any suggestions? Someone gave me this for free about 3 years ago so im trying to keep it running.
the belt is the same exact size as the old one
the belt is the same exact size as the old one