all Chinese Flash File

[Marianne M]

i just flash the 5310 chinese with infinity flash file now set become dead what to do plz help me....here is log file
COM16 [Serial2] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: repair security area
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6225:8A03:8A00]...
CPU: MT6225
high speed boot enabled
chip: 0001:4603:0007
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw1: SINGLE25_06B_PCB01_GPRS_MT6225_S00.A90V1_6_1.BIN
ver. sw2: A90V1.6.1, 00000000
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
flash: EC257E25082501:18E59F00000000
Backup required data Done
Patch required data...
Patch required data Done
Special operation...
Special operation Done
Write...
Write Done
Finalization...
Finalization Done
Finished, time used: 19 sec
Remove/Install battery now !

 

[zamzam]

Telemaster help me. . .
I need flash file CLUB 95

 

[uuja]

yashtel plz help me . . .

I need flash file CLUB 95 urgent. . .

Thanxx in advance

aamirgsm

 

[Triple Moon Goddess]

All China Flasher File www.flasher.wen.su 100% free and 100% ok file all file tested

 

[Nichole ♥]

hello friends today i formate china n73 by vepro but after formate set is totally dead then i try to flash the phone i hve no back up i dwongrade
wrong file after this i read info on phone hear is info

CPU Model:6226
downloading bootloader files ...
bootloader files version:02.09
CPU Name:MT6226
CPU Type:6226
CPU VER:8A02
CPU SW:8A01
flash type:[Intel] 28F128L30_B
flash ID:00898815 (00000000) [11]
flash size:01000000 (16.0M)
Ext RAM size:00400000 Int RAM Size:00040000
and ihve only this info if possiable upload flash file for me

 

[cookie.skittlz]

http://www.4shared.com/file/63443171/e35d1631/SINGLE25_06B_PCB01_GPRS_MT6225_S001A90V1_6_1_En_Cn_16mB0M.html

 

[Santino WwE~4~LyFE]

BR26_05C_PCB01_GPRS_MT6226_S01.BR26_05_21.BIN
i need this flash file plz help me.