All cable's pinouts for chines Mobiles

Welcome to uses Xintel box / Vepro Box
GuangZhou VicEasy Http://www.VE100.com www.xintel.com.cn
find available comport...
Comport:COM5
COM5 connect to box.
box ver:V2.2 datetime:Aug 08 2007
box SN:- - - - - verify code:- - - -
custom name:GZHW sale date:2007-09-16
Connect to VE-Dongles!
VE-Dongles SN:- - - - - - - _ - - - -- - - -
VE-Dongles Ver:V2.3 Datetime:2007-07
welcome to use xintel intelligent box.
-------------------
please keep down power key. until spy success!(press F4 break.)
GND:8
spy and analyse define ->----
MTKchips connect to phone.
spy define success!RXD:7 TXD:5
-------------------
define set success!RXD:7 TXD:5
hint:run outside soft , please remove datacable and vccout clip.
spy complete.
-------------------
please keep down power key. until spy success!(press F4 break.)
GND:8
spy and analyse define ->----
MTKchips connect to phone.
spy define success!RXD:7 TXD:5
-------------------
define set success!RXD:7 TXD:5
hint:run outside soft , please remove datacable and vccout clip.
spy complete.
-------------------
please keep down power key. until spy success!(press F4 break.)
GND:8
spy and analyse define ->----MTKchips connect to phone.
spy define success!RXD:7 TXD:5
-------------------
define set success!RXD:7 TXD:5
hint:run outside soft , please remove datacable and vccout clip.
spy complete.
hint:double line datacable, normal mode use fast spy .
-------------------
please keep down power key. until spy success!(press F4 break.)
GND:2 3
VCC:10
spy and analyse define ->(auto double lines.)---------*.....
.........
MTKchips connect to phone.
spy define success!RXD:7, TXD:8
please return 'set define' page,press 'set define' button.
-------------------
define set success!RXD:7 TXD:8
>>hint:run outside soft , please remove datacable and vccout clip.
PL2303 USB To COM5
Found VE-Dongles ...
connect to VE-Dongles!
Ve-Dongles sn:- - - - - - - - _ - - - - - - - -
VE-Dongles Ver.:V2.3 Datetime:2007-07
VT-Dongles data success!
----------------
open comport:COM5
please turnon your phone ,until connect success(press F4 Abort).
connect to Phone.
CPU model :6226 ( HW_VER: 8A02 )
download Boot ...
boot File Ver.:04.02
NOR flash model :[SPANSION] S71PL127N
NOR flash size:01000000 (16.0M)
NOR flash ID code :0001227E (22202200) [86]
Int.RAM size:00047000 (0.284M)
Ext.RAM size:00400000 (4.0M)
Bootloader in [NOR] flash
Read flash information operation done!
Auto format address ??00E00000 operation len??00200000
NOR (auto) format operation ...
>>operation done.
 
Please, follow instruction exactly like described below

In most cases you need to know Gnd, Rx, Tx pins for flash/unlock operations. What do do if you don't have cable or you have new phone model:

1. find Gnd pin (it's required step, you can't continue until you will know Gnd pin location)
2. find Charge pins (it's optional step, just to save your time during future research)
3. find +Battery pins (it's optional step, just to save your time during future research)
4. connect cable Gnd to phone Gnd
5. try to connect cable Rx/Tx wires to all phone contacts one by one (except Gnd, Charge, +Battery pins) and try to read flash from phone
6. if flash read procedure can start this means that pinout found Ok and you can make other operations

Note about "Chinese models": a lot of different phones with the same name exist on market (as well as many different name phones with the same pinouts), so, if you see in our "All cable's pinouts for chines phones" wrong pinout for "Chinese models" it's good idea to find correct pinout according to above instruction and send new pinout information with full text from phone back label here in this thread.


Best regards
 
Back
Top